A little help from the members please Hyundai Accent 95910-1r250

**Wilberg93** · 12th November, 2019, 07:09 PM

Hello fellow members I’m currently trying to read this v850 mcu using carprog but unfortunately I can’t find a diagram for this particular chip it’s not in codecard. Cpt has one pinout but I’m not sure how to invert from cpt adapter to carprog a10 adapter so that doesn’t help me. If someone can please point me to the right direction as to where can I find a pinout of this mcu to read the crash data i will be greatly appreciated. It’s a UPD70F3629 nec mcu.

**Stelaras26** · 13th November, 2019, 09:55 AM

Maybe this helps you!

**Wilberg93** · 13th November, 2019, 06:25 PM

Originally Posted by Stelaras26

Maybe this helps you!

With which software you do this ? I’m trying with carprog full legit

**freerefill** · 14th November, 2019, 12:05 AM

Carprotool programmer CPT

- CPT_SRS_NEC_D70F3628_PinOut.JPG.jpg

**Wilberg93** · 14th November, 2019, 03:41 PM

Originally Posted by freerefill

Carprotool programmer CPT

- CPT_SRS_NEC_D70F3628_PinOut.JPG.jpg

yes I know about this pinout but I am using carprog so the cables are different even the label cpt uses are different than carprog labels unless someone can tell me which cables to connect from a10 carprog to each one cpt shows on the pinout.

**Wilberg93** · 15th November, 2019, 07:08 PM

i want to thank you all for the help i used stelaras26 image as a example and read perfectly fine once again thanks to everyone. i just used the labeled lettering for the connections converted them to carprog colors and bam! thank you all for the help