Chevrolet Cruze - dashboard error

**pipina** · 13th November, 2019, 12:26 AM

Hi, I have problem with dashboard not showing mileage, trip mileage it show only ----- when you try to scrol with menu or up/down switch on turn signal lever stalk nothing hapen. When tur ignition on I have few errors. I have this insue on insignia time ago and it was corupted eeprom in BCM. I read few threads that is the same problem on cruze. I will be grateful if anyone could look at BCM file, or post any other working only to test (will then find out by trying corupted part, immo, key,...)

Chevrolet Cruze
1.6 16V
2009
LHD
manual gearbox
83kW
F16D4

BCM 13504449

Regards

**jomberykaso** · 13th November, 2019, 01:19 AM

Post dash file 24c16, maybe I could help you

**jomberykaso** · 13th November, 2019, 02:40 AM

test...............

**pipina** · 13th November, 2019, 11:17 AM

Hi, dash readout attached.

Regards

**frankrayk** · 13th November, 2019, 01:22 PM

Originally Posted by pipina

Hi, dash readout attached.

Regards

Test and inform ....

**pipina** · 13th November, 2019, 06:50 PM

Hi, I try both but unfortunatly still the same.

Regards

**Jhared7** · 13th November, 2019, 09:13 PM

you have to change the eeprom ... and place the file they sent you ...
and if it still does not work, verify that there is no welding stuck on any of the elements, that this damage appears in your BCM,
luck

**letalcrudo** · 14th November, 2019, 04:15 AM

Originally Posted by Jhared7

you have to change the eeprom ... and place the file they sent you ...
and if it still does not work, verify that there is no welding stuck on any of the elements, that this damage appears in your BCM,
luck

you mean replacing the old eeprom for a new one. for what?

**pipina** · 16th November, 2019, 01:42 PM

Hi, BCM file is original OK. Corupted is dash file. Anyone with solution or file from other car to test.

Regards

**urametz** · 16th November, 2019, 08:14 PM

Originally Posted by pipina

Hi, BCM file is original OK. Corupted is dash file. Anyone with solution or file from other car to test.

Regards

Hello . Check this dump and be sure to let us continue the work. You may need to calculate the checksums for the changes.Pass in pm. Good luck.

**BYTES** · 16th November, 2019, 09:03 PM

If no file works then with GM online programming will fix ur problem. But am sure a good dash dump will fix your problem unfortunately I dont have any GM dash dump as I work them all obd2 and only acces the BCM

**jomberykaso** · 16th November, 2019, 09:07 PM

Originally Posted by urametz

Hello . Check this dump and be sure to let us continue the work. You may need to calculate the checksums for the changes.Pass in pm. Good luck.

Which checksum mate, original vin + pin + soft versión?

**urametz** · 16th November, 2019, 09:17 PM

Originally Posted by BYTES

If no file works then with GM online programming will fix ur problem. But am sure a good dash dump will fix your problem unfortunately I dont have any GM dash dump as I work them all obd2 and only acces the BCM

All right. Online programming will give a result, but before that, the Dashboard must be reset. And not everyone has access to online.

**urametz** · 16th November, 2019, 09:22 PM

Originally Posted by jomberykaso

Which checksum mate, original vin + pin + soft versión?

I transferred everything that was possible from the BCM dump to DASH. The VIN in the dump are not damaged, the pin and other data differ. I have doubts from analyzing other good dumps about the checksum for the pin.