Welcome to DK, I see you are new here.
Is this your first job changing mileage or you already have experience in other cars?
Welcome to DK, I see you are new here.
Is this your first job changing mileage or you already have experience in other cars?
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ONLINE CAR FILE EDITION SERVICE
SERVICIOS DE EDICION DE ARCHIVOS AUTOMOTRICES
It would be first job, but most importantly i'm just interested in what the each hardware is capable of etc
mate hard car to do for first job, ur better start with something easier (older/cheaper to fix) in my opinion, or you might end up with big headache after spending big $ on a new c class
Sent from my iPhone using Tapatalk
Please hit thanks if this helped you!
andrym3 (18th September, 2020), autodiagdoctor (15th November, 2019), brend (18th November, 2019), jomberykaso (15th November, 2019), Quiet (4th June, 2020), sasy90 (26th July, 2020), Team dz (14th September, 2020)
autodiagdoctor (15th November, 2019), jomberykaso (15th November, 2019), Quiet (4th June, 2020)
Is you c class a modell with needles or full lcd?
Would be with full lcd
For this modell you need to replace the processor in the dash. How good are you in soldering? If you want i can help you with it. I also can solder it for you. Where you are from?
to replace the processor in dash?
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ONLINE CAR FILE EDITION SERVICE
SERVICIOS DE EDICION DE ARCHIVOS AUTOMOTRICES
Robert dc4 (17th November, 2019)
Yes. Its easy if you make it every day. The orginal one cant be reprogrammed or erased. So put a new one in with moded orginal software and all is good. To replace is need only 8 minutes.
https://www.youtube.com/watch?v=R1e6...ature=youtu.be
keturi (21st May, 2020)
Yes km up only. This need not so much people. And down only with a filter, which is useless, dash jumps to real km if you remove. Elprosys need to release something one year after dashcoder had a solution. They got high pressure from his customers. I have this way also all this time, but i dont see any reason to release it, as i say, its useless.
Last edited by Robert dc4; 17th November, 2019 at 09:49 PM.
what kind of solution dashcoder use in case of BMW/FEM system...
they donīt use a can filter...?
Not, ok...
how then...?
If you write that the solution Can Bus filter is useless...
or you mean itīs only useless when Elprosys uses a can bus emulator solution...
and when dashcoder only a solution offers its NOT USELESS...?
write what you want, and who makes pressure or not...
there are more solutions then replacing mcu...
if you like it or not...
you dont understand what i wrote.
can filter or stopper are a good solution on most cars, also at mercedes, only the latest modells W213 W463 and w222 are useless with it.
on all other modells stops the FEM/CAS/EZS the counting but on w213 the EZS is countion all km also if the filter is installed.
so if you pull out later the filter (and you must, mercedes is serching for it) you will see all driven km also from the time after installed the filter.
do you still think its a usefull solution ?
and yes there is also a solution without replacing processor but easy to copy so i will not release it.
Bookmarks