morgano (22nd November, 2019)
Here share a hot-sale auto ECU programmer– KTAG KESS KTM Dimsport BDM probe adapters.
Reference price:
BDM probe adapters full set is €63.99 free shipping.
ktag-kess-ktm-dimsport-bdm-probe-adapters-1.jpg
Package:
Full BDM adapters are compatible with K-TAG/KESS /KTM/ Trasdata.
A full set of BDM adapters (22 pieces in total) for Denso, Marelli, Bosch, Siemens:
1.14AM00T01M Bosch
2.14AM00T02M Delphi DCM
3.14AM00T03M Bootloader ST10xx
4.14P600KT04 Infineon Tricore EDC/MED17
5.14AM00T05M Marelli MPC55xx JTAG
6.14AM00T06M Delphi MPC55xx JTAG
7.14AM00T07M Denso CN1 Boot
8.14AM00T08M Denso CN2 Boot
9.14AM00T09M Denso CN3 Boot
10.14AM00T10M Denso CN1 AUD
11.14AM00T11M Denso CN2 AUD
12.14AM00T00M Delphi DCI
13.14AM00TBAS Base Adapter 1.27
14.14AM00T14M NexusEFI T6 Lotus
15.14AM00TB02 Magneti Marelli BDM insert
16.14AM00TB01 Siemens BDM insert
17.14AM00TB03 EDC7 BDM insert
18.14AM00T18M Magneti Marelli MPC/SPC56xx
19.14AM00T13M Nexus MPC5xx TRW ECU
20.VAG 1.6tdi – Siemens-Continental PCR2.1
21.14AM00T15M Toyota NEC76F-20
22.14AM00T16M Toyota NEC76F-26
Test:
BDM probe adapters has been tested on MJD ECU with KTAG V7.020
Procedures:
Unsolder the ECU
Connect the Marelli BDM probe adapters to KTAG V7.020
ktag-kess-ktm-dimsport-bdm-probe-adapters-2.jpg
Open KTAG V7.020 software
Click the vehicle logo
Select the relevant ECU option and click “OK”
Follow the instructions on the screen to connect to the ECU
Remove the 0 Ohm resistor shown in the picture
Set the ECU on the positing frame 14P800ADBO
Connect the cable 14P600KT02 to the ECU connector according to the pinout
Set the adapter 14AM00TBAS with pull-out insert 14AM00TB02 into the compartment of the frame and right it on the ECU.
Notice: There is no PIN 1 on the adapter!
Warning!
-There is no pin 1 on the tip.
-Line up Pin 2 of the tip with Pin 2 on the ECU
Select the plug-in you need and click “OK”
ktag-kess-ktm-dimsport-bdm-probe-adapters-3.jpg
Click “Read” to identify ECU
ktag-kess-ktm-dimsport-bdm-probe-adapters-4.jpg
Backup the data
Save the files separately
BDM probe adapters read MJD ECU with KTAG V7.020 successfully
Source: [blog.cardiagtool.co.uk]
Enjoy!
morgano (22nd November, 2019)
This is a normal price, nothing special....
If you check in all China sites, this is the price for a long time now....
The list of items served me well to finally identify which adapter is which one. thanks.
Bookmarks