i try to use svci2018 software on svci2019 it doesnt work unless they is something you did on the hardware
i try to use svci2018 software on svci2019 it doesnt work unless they is something you did on the hardware
Capture.jpg
on svci2019 they is this bug for vvdi2 and it doesnt work also
wish i had read this first. Its Rubish and the JLR SVCI J2534 plays up.
SVCI 2020 i have yet to get it to talk to anything, 100% will not talk to land rover d3 or rr sport 2005- 2009. I mesaged tham and the said there will be an update to fix by end or march. Still not.
JLR SVCI J2534 makes mistakes and will not program. Plug Autel passthough in and works fine. Cable did not work at all (put in bin). It keeps failing to connect. They told me to buy this to fix problem, rubish. dont buy their stuff! I wont again.
Hi to all! I've bought SVCI 2020 and tried to read eeprom on EDC16U1 and EDC15P+ and it does to read. With version 2014 I can read EDC16U1, but can't do it on EDC15. Also, this SVCI 2020 does not even identify the EDC16 ECU.
Sent from my S90_Apex using Tapatalk
Edc16, dont ever use autodetect.
Go to diagnostics first, then have a look what ecu number and type is in there.
Turn ign on, wait 10 minutes, then read.
Plenty of great features and special functions.
Even a single Avdi licentie cost more then this tool.
immoneard (31st May, 2020)
I know it costs more less than AVDI....but all it's features sell IT...so if they don't work why to buy? Just to have another bad chinese tool? What about edc15?
Sent from my S90_Apex using Tapatalk
I try read with SVCI V2019, MED9.5 No success. I try read EDC15-No success. The VVDI functions in SVCI V2019, ver 1.1 and 1.2 NOT WORK with dashboard and ecu's too, only diagnostics work. Many new functions are not working!
Today I try read EDC16CP34, don't sucses. Edc16, dont autodetect. Chouse 'EDC16CP/CP34'. ECU is securet... bla, bla, bla, Wrong ecu type selected and end. Dash /M73, H15, TP2/ don't read Immodata.
iv had a svdi 2020 for a few months and its cr*p. nothings activated. am i able to downgrade it and use 2017 or 2018 which has special functions?
iv been trying to make a dealer key for a 2006 passat on the vvdi2 software for it, it lets me load eeprom and decrpyts, but when i click make dealer key it tells me to plug programmer in (blue one) and it says firmware needs updating and cant connect to it.
any ideas anyone?
Stop getting worried about what could go wrong, and start getting excited about would could go right!
hmmmmmmm........eeprom
Digi v4.94, Xtool, R260, R270, Smok, VagProg DataSmart 3+ Smelecom, Autel Maxisys ms908, SpeedFilters
Svdi does not need downgrading.
Simply not choose the latest version in the menu.
Keep in mind that this software is 2014-2015 avdi.
Even the org avdi at that time had issues.
(And still does, Read about avdi org tool on D.K.)
Try a bench setup, next time your stuck.
Of use a different tool on the same Car.
Only then, you can truely comment on what works, and what does not.
And instead of the avdi, menu, you can also try the vvdi2 menu that is in the 2019-2020 version.
I have a vvdi2, Avdi vag full, fvdi 2014 and 2019.
Often, if 1 fails, they others Will also fail.
Better battery suply, bench setup, disconnecting aftermarket appliances, gateway issues, security timers.
All off this needs to be taken in.
Last edited by rob h; 23rd September, 2020 at 10:13 AM.
svcdi 2020 is a big fake!
there is no special function!
only diagnosis possible
I destroyed my dashboard on my Audi A4 B7 when I wanted to add a new key
Please don't buy that shit
FLY FVDI 2014 still worked well
I bought svci 2020 in march 2020, a lot of functions are missing license and can not use.
JOEC (27th December, 2020)
FVDI and SVCI source code is free for everyone, if you need , download from mega.nz link
https://mega.nz/file/g080nbpB#FkzKob...76F9q6FtCXjXY4
Bookmarks