here you go stage 1
hello guys , I have just started remapping and to be honest I have no idea what I'm doing .I have attached the file I edited and the original file .Can someone please check it and guide me and give me some tips .I know the file isn't edited properly and i uploaded it onto my car and it was misfiring excessively .Thanks in advance ,The vehicle is an Audi A4 1.8t.I've also edited the map to add pop and bang but I think I've done it wrong.
here you go stage 1
benson0263 (2nd December, 2019)
If you can share the password that would be great ,it will help me to compare what I did wrong .Many thanks .
I sent password before and now again .
Didnt know you where threader beginner after you write... .
benson0263 (3rd December, 2019)
how you make tune and you don't know how to that,i don't understand this
Proffesional ECU & TCU Tuning
Petrol and Diesel Engines
File Service
Lambda1 (2nd December, 2019)
Thats why I instruct him to log log log and see mine onces. Or better... use mine one and log log log and see whats going one.
Nobody will understand why people do tune but need recheck if its done good... nobody can tell about. everybody has other style and without log its unimpossible to say if something is good or bad...
you only can if something really really bad
benson0263 (3rd December, 2019)
I was experimenting and increased values after threshold rpm and load ,I tried increasing values by 10% and the second time by 50% .With the 50% map the car was misfiring .With the 10% increase I did ,there was slight improvement .I thought I was doing it wrong and required guidance hence my initial post .I hope you can understand.I am not a professional. 'Lambda1' was very helpful and I could see his map is so much smoother and clean.
% tune everytime is shit.
50% increase... holly molly.
Bookmarks