Ducato 2001-2006 remote

[rob h]

Hello guys,


Are any of these card equipted with central locking and remote key?

I need to add a key, to a 2003 Fiat ducato.
Pin, hopefully from code card, or i will retrieve IT from the immobox. (If no remote possible, i Will clone transponder).


Probable a 1 button remote,
I can not find any info on these.

Greetings, Rob

[jodge]

if it's blue key with one button there is no way only dealer or perhaps some zedfull clone remote but i'm not sure about this ZF thing
if it's blue rectangular key then it same like early bravo then it's easy job you can add used too

both system using id48 glass tp

edit:
it depends the market i saw a ducato w/o remote system. The bsi looks like the same but after opening the remote part is missing. The key is black folded rectangular key w/o buttons

[mikajna]

Hello guys,


Are any of these card equipted with central locking and remote key?

I need to add a key, to a 2003 Fiat ducato.
Pin, hopefully from code card, or i will retrieve IT from the immobox. (If no remote possible, i Will clone transponder).


Probable a 1 button remote,
I can not find any info on these.

Greetings, Rob

Hi Rob H, you have remote central unit, behind cd player, open and read 93cXX eeprom and upload here, then you will got pin code, which is different from IMMO.
After that you can programme remote, with SBB remote controls programming section.

You will need TRW two button flip key.

Good luck

Послато са SM-A505FN помоћу Тапатока

[lion0304]

If key is ID48, so remote can generate by KD. Tested for Boxer and Jumper 2006

[mikajna]

If key is ID48, so remote can generate by KD. Tested for Boxer and Jumper 2006

Ducato is ID48 up to 2009.

Two button TRW remote is when it have central unit behind cd, and immo box separated, chip is ID48.

After 2006 it have bsi, same pin code for key and remote, than use SILGA 2 and 3 button remote like fiat stilo and also ID48.

Around 2010+ is ID46 Magneti Marelli BSI, remote is intergreted in PCF7946.

Послато са SM-A505FN помоћу Тапатока

[TERMINATOR1000]

Ducato is ID48 up to 2009.

Around 2010+ is ID46 Magneti Marelli BSI, remote is intergreted in PCF7946.

Послато са SM-A505FN помоћу Тапатока

Hello we need to precode PCF7946 " P5 P6 & P7 " , IO TERMINAL don't give instruction for this remote page of transponder prepare ?

[mikajna]

Hello we need to precode PCF7946 " P5 P6 & P7 " , IO TERMINAL don't give instruction for this remote page of transponder prepare ?

Io terninal doesnt work that for Magneti Marelli bsi, you will got those bytes only for Delphi bsi, for magneti marelli you need Abrites, Zed Full, tmpro2 or Miraclone.

Послато са SM-A505FN помоћу Тапатока

[TERMINATOR1000]

Io terninal doesnt work that for Magneti Marelli bsi, you will got those bytes only for Delphi bsi, for magneti marelli you need Abrites, Zed Full, tmpro2 or Miraclone.

Послато са SM-A505FN помоћу Тапатока

tmpro2 .... yes of course

Module logiciel 112 + Module logiciel 175 + Module logiciel 221 = 1000 € just for Magneti Marelli bsi

an Lonsdor k518 price !

[mikajna]

[QUOTE = mikajna; 3745488] Io terninal ne fonctionne pas que pour Magneti Marelli bsi, vous n'aurez ces octets que pour Delphi bsi, pour magneti marelli vous avez besoin d'Abrites, Zed Full, tmpro2 ou Miraclone.

Послато са SM-A505FN помоћу Тапатока [/ QUOTE]

tmpro2 .... oui bien sûr

Module logiciel 112 + Module logiciel 175 + Module logiciel 221 = 1000 € juste pour Magneti Marelli bsi

an Lonsdor k518 price !

You cant compare it, tmpro2 vs lonsdor, if you want to work without exception, you need relaible tool...you can also have and chinese tools, but main brands in your area you need to work with master tools.

I have all magneti marelli and delphi bsi from tmpro2, even if I can work it with some other tool, eeprom job is most safest way, and job is done in 100% of case.

Послато са SM-A505FN помоћу Тапатока

[TERMINATOR1000]

You cant compare it, tmpro2 vs lonsdor, if you want to work without exception, you need relaible tool...you can also have and chinese tools, but main brands in your area you need to work with master tools.

I have all magneti marelli and delphi bsi from tmpro2, even if I can work it with some other tool, eeprom job is most safest way, and job is done in 100% of case.

Послато са SM-A505FN помоћу Тапатока

No i don't compare , i hait this tool , but is the Chinese better tool in the world for FIAT , and if i need to precode pcf7946 i will contac you after eeprom reading ( https://www.digital-kaos.co.uk/forum...440265-mikajna )

[mikajna]

No i don't compare , i hait this tool , but is the Chinese better tool in the world for FIAT , and if i need to precode pcf7946 i will contac you after eeprom reading ( https://www.digital-kaos.co.uk/forum...440265-mikajna )

Unfortunately, tmpro2 doesnt give you any precode data, you put blank key, after precoding key is locked, like when it comes from dealer. You can send me your key and eeprom, and I will precode you for free.

Послато са SM-A505FN помоћу Тапатока

[TERMINATOR1000]

Unfortunately, tmpro2 doesnt give you any precode data, you put blank key, after precoding key is locked, like when it comes from dealer. You can send me your key and eeprom, and I will precode you for free.

Послато са SM-A505FN помоћу Тапатока

OK , not an problem for us , we have secret key by I/O terminal , we can read it with any hitag 2 reader , after precode an Clio 3 or other cheapest key , you read all pages .... and unlock the key ( like BMW key ! ) . best regards

[eric paris]

hello,

is it possible to virgin the receiver and code a second hand remote ?
with what tool ?

thanks

picture of the remote receiver behind the radio :-)

[TERMINATOR1000]

hello,

is it possible to virgin the receiver and code a second hand remote ?
with what tool ?

thanks

picture of the remote receiver behind the radio :-)

id48 key use separate remote control , yes you can use genuine used remote , learn it with PIN code !
& No need viginize anything !!!!

[eric paris]

thanks
how find the pin code ? reading the eeprom ?