Sorry i was looking at the wrong info. found out that it is a 95320 chip but my next question is how to identify pin 1 as there is no mark on the chip
Sorry i was looking at the wrong info. found out that it is a 95320 chip but my next question is how to identify pin 1 as there is no mark on the chip
Hello to all. There is a little dot that marks pin 1.
Or when you look the ic the marking is from left to right and the ST logo is in left bottom corner, this is pin one. Or put picture of IC here to help you.
IF I HELPED YOU PRESS THE " T " BUTTON
Would you read in circuit or remove from the board ?
Hello to all. Safer is to remove the IC from board and read outside.
IF I HELPED YOU PRESS THE " T " BUTTON
Im using VVDI Prog to try and read this but every time it is saying chip not connected, i have new chips to try as well but the same result, i can read 24C04 and 93C56 every time so not sure what im doing wrong. i will try and upload a pic to show thew chip and software. assuming pin 1 is bottom left by logo on chip. Thanks in advance
Got is sorted, it was a bad circuit board. Strange it would read some but not that chip.
Bookmarks