VW Polo 6 Johnson Control Cluster dead help please

**masterlocksmith** · 9th January, 2020, 03:27 PM

Good day,

I need some help please, have a polo bluemotion 2013 with Johnson Control Instrument Cluster that is dead (Centre display).

Polo 6R bluemotion 2013
Cluster: JCI 6R0920861k
Eeprom: 95320
SW 0306
HW H03
Made in Slovakia

Any feedback or help would be much appreciated thx!

**km666** · 9th January, 2020, 05:26 PM

What caused the problem?

**H2Deetoo** · 10th January, 2020, 10:32 AM

If cluster is really dead then you might be able to get partial immo from engine ecu. Then write it to replacement cluster and learn new transponders.
Or take a virgin(ised) cluster and let it adapt by odis (dealertool).

**sagie1zn** · 10th January, 2020, 02:57 PM

Is there a way to repair the old cluster? happened to me few years ago, tried mileage change with expensive tool, not realising JC could not be done at the time. still have the old clock to experiment if someone can advise what or how to repair

**masterlocksmith** · 11th January, 2020, 10:22 AM

Struggling to find Replacement Cluster since it's not a common polo around my area. Dealers asking way too much for a new Cluster

**masterlocksmith** · 11th January, 2020, 10:22 AM

Originally Posted by km666

What caused the problem?

The owner sent it away to someone to check if coding is the problem for the vehicle not starting and owner received it back with the 95320 eeprom desoldered. I soldered back, cluster came alive except for centre display (Car does not even crank)

**masterlocksmith** · 11th January, 2020, 10:27 AM

Originally Posted by H2Deetoo

If cluster is really dead then you might be able to get partial immo from engine ecu. Then write it to replacement cluster and learn new transponders.
Or take a virgin(ised) cluster and let it adapt by odis (dealertool).

Is it possible to reflash the main chip to a working state with other flash file if I manage to find one?