hi, this should works fine.
Hello,
I have here Mercedes SL500 R230 with Airbag ECU bosch 0285001358.
I have error B1000 - ECU defect and airbag light always ON.
I already tried with some other files I found on forum, no luck.
I have done some modifications to my original file to try to solve the problem. Best I could get is a file with no error codes, however airbag light is flashing.
Attached I send you the 2 files. The original file and the file with no error but light flashing.
Anyone has solution for this problem ?
Many thanks for your help.
hi, this should works fine.
Don’t bite off more than you can chew...Don’t bite the hand that feeds you...
aqua_life (20th January, 2020)
I tried your file but same result.
No error present, but the airbag light is always flashing.
Any other idea ?
aqua_life (20th January, 2020)
rafal, I tried your file but I have many errors.
B1000 - ECU defect
B1318 - coding faulty
B1308 - coding faulty
I think maybe hardware problem in this ECU. I will try to get a used one to try.
Thanks for your help
rafal (21st January, 2020)
hi m8, are u sure u post the original file crash? or did u edited before?
Don’t bite off more than you can chew...Don’t bite the hand that feeds you...
Finally problem solved...
For anyone with the same problem the solution was:
With error B1000 you can try to program ECU with Star Diag however it doesn´t work. Always same error.
I have tried many different files on the internet however I always had error B1000 or Configuration error, until I found one file without error codes however airbag light always still ON. Difficult to understand why...
Then, with this file without errors I tried to program ECU with Star Diag and airbag light went OFF. All good, its running for some days now.
Hope it helps someone !
motocarlos (26th January, 2021), rafal (30th January, 2020)
upload file.................
need help
now my goal is to buy xp-005
who will help?
Bookmarks