can someone help me with it please.
I can't help you with this!
My tool doing the job through CAN.
I am sorry.
I am sure someone will help!
Good luck
To Push Buttons,Thanks and Reputation is always best way to thanks!
Here you go, pass in PM.
tech020 (27th January, 2020)
still have unknown error anyone have solution for this module?
U3FFF is the error.
hi, test this and report back
Don’t bite off more than you can chew...Don’t bite the hand that feeds you...
tech020 (27th February, 2020)
Clone iprog+ can not read this over OBD! I tried on this module. Clone iprog+ sucks, buy original.
alex2019 Thank you. i will try and report.
ateyourv8 your file worked good actually but i think you erased little more than needed. The module was the problem.
alex2019 your file gives two errors and will not erase.
B1490 OCCUPANT DEFECT
B1651 CRASH RECORD DRIVER SIDE
File im attaching is file that required minimal tampering to clear the crash data codes. For everyone on DK
Are you sure, I bought it to test. Apparently this is a good one.
https://www.aliexpress.com/item/3285...5c914c4dwsOLCT
Saw alot of members here read a lot of modules by obd using clone. I don't see why this wont work. If it doesn't work, its alright. Some functions should work.
Last edited by ReverseFlash; 29th February, 2020 at 07:09 AM.
If I helped you, please consider to rep + thanks me.
Bookmarks