HT2v3.1 is not able to generate crypted keys. take other programmer.
Hello all
what i did is:
- read eeprom from cas using xprog
- added new key on new position using HT2 v3.1 from working key that i have
- i wrote back eeprom bin to cas, that was generated in HT2 with added key
finally new key doean't want to start the car
before all i didn't wrote back new eeprom and key also didn't start car so i wrote updated eeprom, new key is locked with my cas information
what am i doing wrong
pls help or give any solution
i got:
- original cas eeprom bin
- updated cas eeprom bin
- key bin that i added to eeprom
if this can help
Last edited by Chrisman; 9th February, 2020 at 10:22 AM.
HT2v3.1 is not able to generate crypted keys. take other programmer.
Chrisman (11th February, 2020)
are you sure?
look there is crypto mode automatically choosed when pcf7945 transponder is in the coil
ht.JPG
can you help me and add my key into eeprom using bmw explorer or multi tool if you have?
Last edited by Chrisman; 9th February, 2020 at 11:21 AM.
pretty sure tried it different time
as far as i know only BMW Explorer can make cryptkeys with hitag2
do you have cgpro cgdi bmw vvdi acdp or something?
Chrisman (11th February, 2020)
i don't
i edited my post before your reply
can you help?
i added this key into first free position which is 2 (key numbers from 0-9)
give page3 config/psw from working key will try something, doesnt have explorer or multitool
Chrisman (11th February, 2020)
the only page i can read from working and writted key (not unused) is page 0
maybe this 2 files from working key will help?
i also don't understand, why there are so many youtube vids, with making keys like i did using xprog and ht2, no one says that it can't work
i just asking for help, to add this key into my dump, sure i can go to locksmith but i thought that, forum is for helping people each other
chrisman check you pm
Chrisman (11th February, 2020)
Be polite. No Thanks + Rep, no HELP!!! Slava Ukcraine. Dead Putler civilians's killers!!!
bearheroes (10th February, 2020), doctore (9th February, 2020)
ok, thx for lesson
but i still know that bmw explorer can add key into cas, prepared by HT2
just if anyone can help and add it to my dump on 2 position (which is 3rd key)
klucze.JPG
Last edited by Chrisman; 9th February, 2020 at 01:52 PM.
you can't , ALL keys contain an CODE to decript ISN in CAS3+ , in new key you don't have this code !
And never write back in BMW ...ISN.JPG
doctore (11th February, 2020)
YES but NO , engine never start is CAS3+ send bad ISN , ISN is de-crypted by KEY
a) you have real ISN ( in engine )
b) you have an working key + an real BMW tool
c) 64 time method + an real BMW tool
The only way for Mr Chrisman is toi let it down or to invest 600$-1500$ in another tool
Bookmarks