EDC16C34/2.20 1037399617 g8db Ford Focus Kess v2

[nico777]

Good evening everyone, kindly I need help, I have a Ford focus 1.6 tdci of 2009 engine code g8db, I own the kess v2 clone where, however, in the list there is the abbreviation g8da not g8db, I was able to read the file through kess anyway, the control unit is identified as EDC16C34 / 2.20 the software number is: 1037399617 what I ask is you can write this control unit with the kess v2 clone, can you please help me?

[khaos87]

Hello, the most secure way it's with BDM, if your kess is good eu clone, i think will do that ECU but need to make it exactly the way KESS V2 say it... after flash wait 3 min and i forgot other special requirements...
Regards

[stanislav georgiev]

Once you've read it, you should be able to write it down.

[nico777]

Good evening thank you for the answers, my kess v2 is version 2.47 it was bought recently on amazon if you want I still have the link with the specifications, however it is the one with the red pcb, if I proceed with the writing waiting 3 minutes I run the risk of blocking the control unit? In the meantime, thank you guys

[nico777]

Sorry I still forgot, the machine has a g8db engine code which is not present in my kess, in my kess it has the g8da can I write the file possibly selecting g8da?

[khaos87]

As stanislav georgiev says, if you read it with the tool, it's must and write it, the 3 mins waiting after flash is for injector calibration.. Everytime it have risk when you flash ecu...

[Fronzies]

hello, with a good kess 2.47 you can write it and read it almost "safely". I on an ecu focus edc16 I have not had the opportunity to read it in obd.

[AVDigitale]

first try if you can read is OK,if during reading stopping in 35-40% then you need BDM read/write
BR

[nico777]

Hi guys, thank you all for the answers