Register
Results 1 to 9 of 9
  1. #1
    DK Veteran

    Join Date
    Aug 2013
    Location
    uk
    Posts
    456
    Thanks Thanks Given 
    204
    Thanks Thanks Received 
    328
    Thanked in
    130 Posts

    Default Subaru outback 2011 MK70 abs pump help

    Hey guys....

    Got a subaru outback 2011 with mk70 abs pump module.
    Have vdc light on cluster but no abs light.

    Question i have is yaw rate sensor /g sensor

    Where is the location of sensor..

    Looked in normall place for 2006 not there..

    Spoken to subaru parts in uk they havent a clue... only one person has said its incorporated into mk70 pump module...

    Stumped on this one..

    Live data yaw rate all over the place fluxuation -24 -54 tryed recalibation still jumping up and down.. car on good ground not moving
    Have c0057 vdc to ecu comms think yaw rate is messing with it..

    Anyone can shed some light on the issue would be great..

    Where is yaw rate sensor? Mk70 abs pump

    Many thanks guys.

    Thayer201
    If i helped.... please dont forget to press the THANKS + REP buttons .

  2. #2
    Newbie
    Join Date
    Feb 2020
    Posts
    4
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    1
    Thanked in
    1 Post

    Default

    Quick search should be at the middle of the car around hand break lines connection
    Last edited by MakiMaki; 19th February, 2020 at 07:24 PM.

  3. The Following User Says Thank You to MakiMaki For This Useful Post:

    thayer201 (20th February, 2020)

  4. #3
    DK Veteran

    Join Date
    Aug 2013
    Location
    uk
    Posts
    456
    Thanks Thanks Given 
    204
    Thanks Thanks Received 
    328
    Thanked in
    130 Posts

    Default

    Quote Originally Posted by MakiMaki View Post
    Quick search should be at the middle of the car around hand break lines connection
    Yes you would think... uptill 2009 but after its not there..

    Ive searched and called subaru uk and nothing..
    If i helped.... please dont forget to press the THANKS + REP buttons .

  5. #4
    V.I.P. Member
    Meat-Head's Avatar
    Join Date
    Oct 2009
    Location
    Meatheadshire (Between London and Scotland)
    Posts
    31,904
    Thanks Thanks Given 
    8,823
    Thanks Thanks Received 
    6,053
    Thanked in
    4,770 Posts

    Default

    Ring some lowlife scum scrap yard. Or go on ebay find one for sale

    ”where is it located, my garage said its fkcued, i need to check the part number”

    personally would start with read the indain fault codes, whilst on dk thanks buttons

    Was Banned For Being Certifiably Insane and Stupid

  6. The Following User Says Thank You to Meat-Head For This Useful Post:

    thayer201 (20th February, 2020)

  7. #5
    DK Veteran

    Join Date
    Aug 2013
    Location
    uk
    Posts
    456
    Thanks Thanks Given 
    204
    Thanks Thanks Received 
    328
    Thanked in
    130 Posts

    Default

    Quote Originally Posted by Meat-Head View Post
    Ring some lowlife scum scrap yard. Or go on ebay find one for sale

    ”where is it located, my garage said its fkcued, i need to check the part number”

    personally would start with read the indain fault codes, whilst on dk thanks buttons
    Thanks meathead.....

    Tryed that already ���� called scap yard no 2011 so cant check only have upto 09 and all taken out of cars...

    Tryed 3 subaru parts specialist in uk... all didnt have a clue not listed....

    Tryed autoxxxx even called so they looked into it... no part on wiring diagrams for 2011 year subaru outback.. even emailed me.

    Honnestly wouldnt be asking if i wasnt stumped on this..

    Tryed google 2011 2012 2013 yaw rate sensor g sensor... nothing for my year only before... on cars upto 09 use the mk60 abd pump but this has mk70 abs pump with main pcb board not hybrid board..

    I just cant find it... all seats are out all capet out checked all along main tunnel area near center of car looked front to back..

    Now fault code points to mk70 pump has breakdown in can signal to main ecu which i know they suffer from..

    But i cant rule out yaw rate as cant find it ����
    If i helped.... please dont forget to press the THANKS + REP buttons .

  8. #6
    V.I.P. Member
    Meat-Head's Avatar
    Join Date
    Oct 2009
    Location
    Meatheadshire (Between London and Scotland)
    Posts
    31,904
    Thanks Thanks Given 
    8,823
    Thanks Thanks Received 
    6,053
    Thanked in
    4,770 Posts

    Default

    Off topic:-

    jagwar. S or x type. Rear light inside trunk 2 sensors size your thumb
    one next to “fuel filter “ (suspension turret)

    OFF TOPIC:

    vw gulf mk4. Remove glovebox end of dash cowering

    Off topic

    peugot 206 (rare as shit). Remove passenger seat, cordern the seat bolts off, no oublic access, dig hole in roped off srea.

    ON TOPIC:-

    count tge number of pins/wires on abs

    brake, can hl. Diag, ign 2xb- 2xb+. 8xwheel. Dsc off switch. Bulb outx2 (can?)

    two to sensor

    Was Banned For Being Certifiably Insane and Stupid

  9. #7
    DK Veteran
    Join Date
    Feb 2010
    Posts
    397
    Thanks Thanks Given 
    11
    Thanks Thanks Received 
    13
    Thanked in
    13 Posts

    Default

    Quote Originally Posted by thayer201 View Post
    Thanks meathead.....

    Tryed that already ���� called scap yard no 2011 so cant check only have upto 09 and all taken out of cars...

    Tryed 3 subaru parts specialist in uk... all didnt have a clue not listed....

    Tryed autoxxxx even called so they looked into it... no part on wiring diagrams for 2011 year subaru outback.. even emailed me.

    Honnestly wouldnt be asking if i wasnt stumped on this..

    Tryed google 2011 2012 2013 yaw rate sensor g sensor... nothing for my year only before... on cars upto 09 use the mk60 abd pump but this has mk70 abs pump with main pcb board not hybrid board..

    I just cant find it... all seats are out all capet out checked all along main tunnel area near center of car looked front to back..

    Now fault code points to mk70 pump has breakdown in can signal to main ecu which i know they suffer from..

    But i cant rule out yaw rate as cant find it ����
    If you can see it in live data you should be able to see the part number of the module you are reading it through to determine if it is incorporated or a separate component

  10. #8
    V.I.P. Member
    Meat-Head's Avatar
    Join Date
    Oct 2009
    Location
    Meatheadshire (Between London and Scotland)
    Posts
    31,904
    Thanks Thanks Given 
    8,823
    Thanks Thanks Received 
    6,053
    Thanked in
    4,770 Posts

    Default

    Advertisement

    what about ringing a subaru rally speclist

    http://www.adgespeed.co.uk/

    use google, no carpet no dash, no extra weight

    Was Banned For Being Certifiably Insane and Stupid

  11. #9
    V.I.P. Member
    Meat-Head's Avatar
    Join Date
    Oct 2009
    Location
    Meatheadshire (Between London and Scotland)
    Posts
    31,904
    Thanks Thanks Given 
    8,823
    Thanks Thanks Received 
    6,053
    Thanked in
    4,770 Posts

    Default

    BUMPAGE

    ADVERTISEMENT

    https://www.ebay.co.uk/itm/Subaru-Legacy-Yaw-rate-Acceleration-Sensor-unit-Module-ABS-ESP-ASC-27542AE020/142413984670?

    one on fkeabay loojs durty which implies under the hood. Not that dirty judt obe corner
    so shielded sonewhere

    ask the pokack selling it where and yesr

    Was Banned For Being Certifiably Insane and Stupid

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.