FORD EDC16C34 Speed Limiter

[naskochipa]

Can anyone make a limit of 130 km I tried a lot of decisions and I come to the conclusion that maybe the speed limit is in eeproma but I still decided to ask address 1E8D02 and the switch to address 1E8D00 does not work if there is a solution I will be grateful

[Pepesoft]

I usually change the speed limiter on those cars with delphi/autocom/wow clone. Few cases has been that need some ori tool like i have Bosch KTS560 with online support.
Never had to change it in the ecu dump.
Some cars though save the limiter in dash like mercedes maybe in this case is the same?

[naskochipa]

I already tried with the diagnostic tool did not work

[momogsm]

HI

VMAX OFF, CHECKSUM CORRECTED

PASS IN PM

REPORT BACK

THANKS

[naskochipa]

HI

VMAX OFF, CHECKSUM CORRECTED

PASS IN PM

REPORT BACK

THANKS

You don't read well what I wrote, these addresses don't work and I don't want to remove the limiter to do it at 130kmh

[momogsm]

You don't read well what I wrote, these addresses don't work and I don't want to remove the limiter to do it at 130kmh

HI

OHH MY MISTAKE, SORRY FOR THAT, BUT AS I SEE IN YOUR FILE THE VMAX IS ALREADY LIMITED AT 130KMH, ARE YOU SURE THAT IS THE ORIGINAL FILE ?, BECAUSE I THINK IT NOT

REPORT BACK

THANKS

[naskochipa]

This is the file I made with vmax 130kmh and the addresses that I changed and they don't work

[icezero2010]

This is the file I made with vmax 130kmh and the addresses that I changed and they don't work

have u test 1EAF8A?

[naskochipa]

have u test 1EAF8A?

Test not work

[icezero2010]

Can u please upload a ori file ?


Gesendet von iPhone mit Tapatalk

[icezero2010]

Can anyone make a limit of 130 km I tried a lot of decisions and I come to the conclusion that maybe the speed limit is in eeproma but I still decided to ask address 1E8D02 and the switch to address 1E8D00 does not work if there is a solution I will be grateful

PrpCtl_swtSpdLimType_C u must find this switch and set to one than work your limiter

oh sorry i see u test this but is the adress really correct ?

there i not sure i have no good damos in this area

thats the problem

[morgano]

And 0x1E8D06 ? Seems more like a topped up SL, try lowering it.

[icezero2010]

And 0x1E8D06 ? Seems more like a topped up SL, try lowering it.

Yes but exact before 2 switch 1 is to activate limiter and the second is eeprom or flash


Gesendet von iPhone mit Tapatalk

[naskochipa]

Can u please upload a ori file ?


Gesendet von iPhone mit Tapatalk

Here is the file I downloaded from the car