I have had this problem on my Starview box, but i simply delete the channel and do a rescan and it comes back. Have you tried this mate?
For some reason i have lost the signals for some channels since yesterday. Channels like setanta1 now display a message saying no or bad signal. Noone has touched the receiver as i control them. Any ideas? Will a signal booster help? Anything else which would help wil be appreciated.
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
I have had this problem on my Starview box, but i simply delete the channel and do a rescan and it comes back. Have you tried this mate?
Wot box is it you got mate .....Paul
If your Happy with the Help push the Thanx button
PAUL
Will do. Thanks for the idea but then i will have to make a new channel list. My current channel list is very well sorted. Will i be able to keep it? Thanks for the fast response
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
Cant you only delete the 2 channels on that Eurovox you are using? Once deleted do a scan, and i'm sure everything else will stay in place and then just shift the 2 new found channels along to where you want them. I've not used a Eurovox so not too sure how it works. I'm going off my Starview experience mate.
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
which eurovox is it,maxv etc
Is this a software bug?
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
Does the box not put them in catorgeries any way like kids sport movies etc
Yep.
So shall i delete all the channels which dont work and rescan them and is that everything sorted?
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
A TP has changed in some areas. What is your general location? Press info button twice on any missing channel and post the frequency please.
Will do that tomorrow. My locale is blackpool in lancashire in north west of england.
Read the Rules here; they apply to EveryOne.
__________________________________________________
DM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Technomate 2300 motor powered by UsalS
check your frequencies.i have listed the ones that i have had to alter in the last few days. check out jimro further down on these threads.
jimro
can you not just delete the ones that are gone and instead of power scanning just go to update the channels instead
Bookmarks