Edc17cp44 stays in boot mode? Need fast advice. Touareg 2016

[Hexer84]

And from me...

Is this the reason why it stays in programming mode?

How to get rid of programming mode?

Thank you so much for your help.

Any ideas?

[jurebv]

Your fileservice should know that boot/bdm readouts must be edited directly / differences transfered....he cant just send you a file he already has and winols says 100% same...its ok for obd reads (but even then i wouldnt recommend it) but not for boot reads

[bobolin4o]

Is this the reason why it stays in programming mode?

How to get rid of programming mode?

Thank you so much for your help.

Any ideas?

Simply flash with ori, or my/Babos file and test the car!

[Hexer84]

Simply flash with ori, or my/Babos file and test the car!

Ok, I need first to test if ori works.

After that I will check your repaired file.

With ori file it should work. Right?

[bobolin4o]

Ok, I need first to test if ori works.

After that I will check your repaired file.

With ori file it should work. Right?

Of course should...

[Hexer84]

I wrote ori back. Customer drives back to car to test it.

I hope the car will run.

I will tell you the result.

I am wondering why it stuck in programming mode.

[bobolin4o]

I am wondering why it stuck in programming mode.

Because the first half of the file is garbage.
And... why the car is not at you?

[Hexer84]

Car runs with original file.

Lord... I thought I was in big trouble but now I feel better.

I told the tuner to adjust egr rate like it was before the VW update.

Customer wants diesel gate software back/egr should work like with Dieselgate software and a stage 1.

So it seems that this didn't work.

[Hexer84]

Because the first half of the file is garbage.
And... why the car is not at you?

Car is in shop and get new parts. He decided to bring ECU because car stands acutally

[Hexer84]

Can somebody provide a frf converted to bin for this ECU with software before VW Update?

[Myjector]

Sure, make an ID first and pos it here