I think you need read micronas from the new dash too if you want to change its eeprom data by dumps.
Hello. I wanna update my cluster to newer one with different eeprom. Anyone can add my immo data ( in pic ) to this cluster eeprom my svci don't connect to it so need do manually. if anyone can help would be great. I can get service mode and read write eeprom using xtool but with x tool can't change immo data only service mode and read write. Thanks. P.s. if needed I have this eeropm immo data is well.
I think you need read micronas from the new dash too if you want to change its eeprom data by dumps.
But why? I have all immo data from this cluster is well I'm just need change to my data as far as I know all immo data is in this eeprom only micronas just holds security
I have immo data from this eeprom is well I can read write by obd eeprom
Ok, then do it obd. For changing immo data in dump need also micronas dump.
rafal (10th March, 2020)
That's the problem I don't have tool with can do by obd ivcan read immo data by obd bit cant change.
Rackis18 (26th March, 2020)
Yes read your Micronas immo file and post here. We can manually insert the correct immo data from picture!
Rackis18 (26th March, 2020)
Hello guys I managed to read my dash micronas is well anybody can change immo tada in this cluster please? Thanks alot.
alen19091987 (28th June, 2020)
Bookmarks