Not sure
First check if oil service is overdue.
Try to drive it for a while
If that fails and the engine is warm enough ,try neutral/park brake on/and spam that dpf button,
Nothing to lose except a couple of hours
Trivial thread name.
Have this little truck with dpf mil ON, the truck is not listed in the latest Launch,
it is not listed in Actia, it is not listed in old BrainBee.
The lil truck has a dpf button in the consolle, but the owner manual is missing,
how can I perform a forced clean to the dpf?
Thank you.
Not sure
First check if oil service is overdue.
Try to drive it for a while
If that fails and the engine is warm enough ,try neutral/park brake on/and spam that dpf button,
Nothing to lose except a couple of hours
A failure will not appear till a unit has passed final inspection
alessioblaupunkt (12th March, 2020)
Nope. Ish not working but I'll hit your button.
Last edited by alessioblaupunkt; 12th March, 2020 at 01:57 PM.
rideon (12th March, 2020)
Quoted for future reference
This is suppose to be some generic instruction on how to use said buttonTo kick off a manual DPF regeneration you should
- Put the vehicle in neutral
- Put on the hand brake
- Leave the pedals alone!
- Press and hold the DPF button for 2 seconds or longer
French seems to rebadge that nissan and called it "maxity" .Add that in the thread title,might be useful.
Try searching for some french user manual,
A failure will not appear till a unit has passed final inspection
Meat-Head (26th March, 2020)
Got a "quick scan" with Launch x431 and these come out:
P20B9
P20C1
both related to heater inside AdBlue tank.
Fix the heater first then you can do regeneration. Maybe.
I'll check wiring and eventually remove the AdBlue Tank for heater change.
NT400 can't find nothing, silly name, Launch call it CABSTAR and the other name is F24.
Last edited by alessioblaupunkt; 29th May, 2020 at 12:39 PM.
Bookmarks