EDC17CP14 Clone Help

**peechie** · 14th March, 2020, 12:46 PM

Hi Everyone,

Some help would be greatly appreciated. Cloned a Skoda Octavia 2013 CR-170 EDC17CP14.
Luckily I had Full BDM backup with EEPROM. Car starts and dies with the warning message "Immobiliser Active"
I did clone the EEPROM also but some reading online states EEPROM is OTP only.

Does that mean I need a IMMO OFF?

Thanks for the help guys.

**rafal** · 14th March, 2020, 12:54 PM

hi
post full reading ori and donor here................

**peechie** · 14th March, 2020, 01:13 PM

Here are the files. The ecu i bought is EDC17CP14 NEW and the ori backup is Skoda Octavia thank you

**arvedo** · 14th March, 2020, 03:14 PM

here you have the solution, if you have dtc present you have to deactivate them, regards

**peechie** · 14th March, 2020, 04:14 PM

Thanks, what do you mean deactivate DTC? Delete codes on diagnostics tool?

**peechie** · 14th March, 2020, 08:21 PM

Car starts and drives thanks! however the glowplug light is flashing. I scanned with diagnostics and comes up ECU wrongly coded. No engine light or anything