2017 Renault Captur spare key

[Jimmy07]

Best tool to do this NOT AVDI

OBDSTAR or Renault ECU tool ?

Thanks in advance 👍🏻

[TERMINATOR1000]

if AKL only AVDI or theft car tool can do the job by OBD2 ( you need pre-code the virgin key ! ) : 4000 - 4500€
For ADD an key R. E. T ( if AKL VVDI Prog + R.E.T : 1200€ )

Remember ! : if you program key by 100% OBD2 you delete anti theft protection 2015+ , AFTER that , any cheap too can program AKL ( Renolink 50€ including ! )

[gary01]

Hello,

RET can do it.if AKL you must to read hfm with programmer an load the dump in RET.and you can programm a new key

You can download the pinout on immo tool website


Envoyé de mon iPad en utilisant Tapatalk

[Jimmy07]

It’s a spare key job OBDSTAR claim they do it but..

[adrian1914]

I can help you. All you need it’s clip.

[auto techniek]

I can help you. All you need it’s clip.

Do you mean you can do spare key only with Clip diag tool?

[adrian1914]

Yes. If you have clean key card then yes.

[Jimmy07]

Have Obdstar DP and was going to buy Renault ECU tool tomorrow if Obdstar won’t do it.

I’m adding a key card as owner has original and I have OEM card

Read a horror story where Obdstar corrupted flash and car had to go to dealership

[auto techniek]

Yes procedure takes about 90 minutes.

Need a good battery charger and pray

[Jimmy07]

Don’t like the sound of the praying bit

Have you done a few auto ?

If Renault ECU tool is quicker than obdstar I’d buy it tomorrow

[auto techniek]

I don t have RET.

I m wel interested if you got a good deal buying RET.

[Jimmy07]

Crowd in Ballymena N.Ireland sell it £550

Premium tools 24

[Jimmy07]

Getting serious mixed reports on this job ?

It’s a spare key and if it’s the same system as a Renault Clio IV should only take minutes with Obdstar

Can anyone clarify please

[p1et]

Hello,

RET can do it.if AKL you must to read hfm with programmer an load the dump in RET.and you can programm a new key

Hello,

Could you please tell me where is the tab to choose HFM D_Flash read by programmer? I can't see anywhere where I can do this... And it's not explained in any manual.

Only manual I can find is how to make AKL with newest update, without removing HFM (by erasing and re-learning HFM) but I don't wanna do this like that, I have HFM dump already read.

Do I need to first open 'Memory dump' and load here HFM file?

And then go to main screen Clio 4 -->

1) identification
2) key program?

And it will import data from that HFM dump? Is that right steps?

[gary01]

Hello,

Load your dump like in your first screenshot and click on read identification.you can see your isk.and do key programming