Hello Guys,

I'm having a problem. I have a 106 XSi 1.3i(without immo) and I removed the engine and engine loom to raplace it with a 106 1.6 16v. The new ECU is IAW 1AP.41 and after connecting everything, I tried to remove the immo by flashing the clock file to the 28F512. I waited 2 minutes and cut the 2 pins, flashed again the original file and tried to start the engine but I get no fuel and no spark. I tried this same step 7 to 8 times but nothing. Looks like the ECU is locked and does not give spark or fuel. I don't have the immo box behind the dash since this is a engine conversion. What should I do or Im doing something wrong?

Best Regards.