Reply With QuoteIf my memory is good, it's between pin 7&8 you need to switch, don't connect together, I tried and all Can bus was crashed on x6, need to learn steering, ews, etc...
Results 1 to 7 of 7
-
26th March, 2020, 05:10 PM #1DK Veteran
- Join Date
- Jul 2010
- Location
- Athens
- Posts
- 1,159
- Thanks
- 665
- Thanks
- 307
- Thanked in
- 209 Posts
INPA K + Dcan Diagnostic Cable Switched
Hello,
Can not find any info on the 4 position switch on the INPA K+Dcan cable with switch.
Anybody can through some light here as the Chinese are in the dark...
Best RegardsKnowledge is to share... so if I have helped just press [Thank You + Rep.]...
-
26th March, 2020, 08:10 PM #2Newbie
- Join Date
- Mar 2012
- Posts
- 6
- Thanks
- 1
- Thanks
- 2
- Thanked in
- 2 Posts
-
The Following User Says Thank You to stephane76700 For This Useful Post:
speedy100 (26th March, 2020)
-
26th March, 2020, 08:33 PM #3DK Veteran
- Join Date
- Jul 2010
- Location
- Athens
- Posts
- 1,159
- Thanks
- 665
- Thanks
- 307
- Thanked in
- 209 Posts
Thank You but the switch has 4 positions similar to equiveland Fiat cable. What each position is for and when to switch? Before or after software start etc...
Originally Posted by stephane76700
Best RegardsKnowledge is to share... so if I have helped just press [Thank You + Rep.]...
-
27th March, 2020, 04:00 PM #4DK Veteran
- Join Date
- Jul 2010
- Location
- Athens
- Posts
- 1,159
- Thanks
- 665
- Thanks
- 307
- Thanked in
- 209 Posts
... Hmmm I thought this was a very popular cable and info would be easily available...
Knowledge is to share... so if I have helped just press [Thank You + Rep.]...
-
30th May, 2020, 05:51 PM #5Member
- Join Date
- Jul 2018
- Posts
- 41
- Thanks
- 5
- Thanks
- 9
- Thanked in
- 6 Posts
They may be using a 4 position switch, but only 2 positions are really needed. One position connects (shorts) pin 7 to pin 8. The other position leaves pin 7 and pin 8 not connected between them.
-
The Following User Says Thank You to nextor For This Useful Post:
speedy100 (31st May, 2020)
-
30th May, 2020, 07:33 PM #6DK Veteran
- Join Date
- Mar 2017
- Location
- Portugal
- Posts
- 446
- Thanks
- 105
- Thanks
- 2,020
- Thanked in
- 180 Posts
just 2 of those really do something
as far as i know its to switch between k-line and can protocols
-
The Following User Says Thank You to marko6jpt For This Useful Post:
speedy100 (31st May, 2020)
-
16th May, 2022, 12:33 AM #7Member
- Join Date
- May 2017
- Location
- Santo Domingo
- Posts
- 44
- Thanks
- 33
- Thanks
- 1
- Thanked in
- 1 Post
it is just a switch connecting pin 7 and 8 Originally Posted by speedy100
Hello,
Can not find any info on the 4 position switch on the INPA K+Dcan cable with switch.
Anybody can through some light here as the Chinese are in the dark...
Best Regards
Bookmarks