If my memory is good, it's between pin 7&8 you need to switch, don't connect together, I tried and all Can bus was crashed on x6, need to learn steering, ews, etc...
If my memory is good, it's between pin 7&8 you need to switch, don't connect together, I tried and all Can bus was crashed on x6, need to learn steering, ews, etc...
speedy100 (26th March, 2020)
... Hmmm I thought this was a very popular cable and info would be easily available...
Knowledge is to share... so if I have helped just press [Thank You + Rep.]...
They may be using a 4 position switch, but only 2 positions are really needed. One position connects (shorts) pin 7 to pin 8. The other position leaves pin 7 and pin 8 not connected between them.
speedy100 (31st May, 2020)
just 2 of those really do something
as far as i know its to switch between k-line and can protocols
speedy100 (31st May, 2020)
Bookmarks