Louislesinge (4th April, 2020)
Louislesinge (4th April, 2020)
Can you helpme Catalizator?
as requested,virgin eeprom
Last edited by Catalizator; 6th May, 2020 at 06:13 PM.
arielcom (5th April, 2020), Louislesinge (4th April, 2020)
Louislesinge (4th April, 2020)
Hi,
@Catalizador: I rather think the same as @speedy100, i mean autocoding works with EDC17C11 on Trafic II/Vivaro but not sure it will be the same on Master III/Movano. It certainly needs to be learned with Clip
Anyway, wait and see...
Greetings,
if a comrade from Paraguay does not make mistakes while writing ecm, and uch is in the programmed state with the keys, everything will be fine. I only work with renault, and over the years of repair have tested many repair methods.
Ok, but by the way when you mount virgin ECU on Twingo II Clio III and many other Renault it doesn't learn antitheft code just making ignition ON (the way it was in older cars like Scénic/ Mégane 1 for exemple) , ECU needs you to send command with CLIP , that is what speedy100 and me are doubting about.
Another thing, EDC17C11 is mounted in Trafic II mark 3 (>2010) so problem could be the same...
Saludos,
Last edited by Louislesinge; 5th April, 2020 at 11:56 AM.
albertros (7th April, 2020)
Hi, same problem Catalizator. i did write your dump using ktag sussesfull. do you have another possibilities?
remove and read ecm and compare the data with my dump.
when i write the data its same. but after put the ecu in car and put contact with the key it change and have 135 differences.
[QUOTE = arielcom; 3839829] когда я пишу данные, то же самое. но после того, как поставить ЭБУ в машину и поставить контакт с ключом, он меняется и имеет 135 отличий. [/ QUOTE]
write down my dump, then read ktag again and compare the values. I suspect your programmer. I also think there is a malfunction in the car itself.
when installing ecm, it responds to diagnostics, read errors?
more information. this will help solve your breakdown and speed up repairs
https://www.digital-kaos.co.uk/forum...73#post3759373
I leave confirmation here that my file should work
Louislesinge (7th April, 2020)
no passs report
Bookmarks