Please virgin file for ecu renault master/opel movano Bosh 0281016808

[Catalizator]

edc17 in renault can do eeprom for auto-sync. and no more work is required

[arielcom]

Can you helpme Catalizator?

[Catalizator]

as requested,virgin eeprom

[speedy100]

as requested,virgin eeprom

It will be good to know if it worked OK so we all learn something new

Best Regards

[Louislesinge]

Hi,
@Catalizador: I rather think the same as @speedy100, i mean autocoding works with EDC17C11 on Trafic II/Vivaro but not sure it will be the same on Master III/Movano. It certainly needs to be learned with Clip
Anyway, wait and see...
Greetings,

[Catalizator]

if a comrade from Paraguay does not make mistakes while writing ecm, and uch is in the programmed state with the keys, everything will be fine. I only work with renault, and over the years of repair have tested many repair methods.

[Louislesinge]

Ok, but by the way when you mount virgin ECU on Twingo II Clio III and many other Renault it doesn't learn antitheft code just making ignition ON (the way it was in older cars like Scénic/ Mégane 1 for exemple) , ECU needs you to send command with CLIP , that is what speedy100 and me are doubting about.
Another thing, EDC17C11 is mounted in Trafic II mark 3 (>2010) so problem could be the same...
Saludos,

[arielcom]

Hi, same problem Catalizator. i did write your dump using ktag sussesfull. do you have another possibilities?

[Catalizator]

remove and read ecm and compare the data with my dump.

[arielcom]

when i write the data its same. but after put the ecu in car and put contact with the key it change and have 135 differences.

[speedy100]

when i write the data its same. but after put the ecu in car and put contact with the key it change and have 135 differences.

Try by reprogramming the virgin fie in the ECU and then use CAN CLIP to adapt it and see what happens.

Best Regards

[Catalizator]

[QUOTE = arielcom; 3839829] когда я пишу данные, то же самое. но после того, как поставить ЭБУ в машину и поставить контакт с ключом, он меняется и имеет 135 отличий. [/ QUOTE]


write down my dump, then read ktag again and compare the values. I suspect your programmer. I also think there is a malfunction in the car itself.

when installing ecm, it responds to diagnostics, read errors?

more information. this will help solve your breakdown and speed up repairs

[Catalizator]

https://www.digital-kaos.co.uk/forum...73#post3759373
I leave confirmation here that my file should work

[vladimir88]

no passs report

[arielcom]

Try by reprogramming the virgin fie in the ECU and then use CAN CLIP to adapt it and see what happens.

Best Regards

i cant get CLIP , sorry. My friend didnt arrive. sorry

but in 2 days i will have renolink 1.87 with red cable. can i use it for this?