Hi yes the s2000 I've tried to write the immo off file but ktag and xprog both stop at 75% do you know why ?
You need to take EEPROM off the board to R/W in order to be sure for a good dump. Some programmers do R/W onboard this ECU like Whillem for example. See pic...
And YES You need to cut F3 and F4 before You turn ignition ON...
IMG_20190312_135831.jpg
Best Regards
Knowledge is to share... so if I have helped just press [Thank You + Rep.]...
It still failed to write with the eeprom removed from the board with xprog but the orig files writes 100% the immo off file stops at 75%
Is it worth trying anothe programmer like the one in the picture or is it a crap immo off file
Already tried both tried another eeprom and erased but still the same will try again though does the 95080 have write protection ? Or is it because the immo file has parts that are blank so failed to write those areas ?
Ok I'll give that a try tomorrow and report back have up for the day
The original chip has been partially memory locked.
hi thanks for the reply what the best solution for this ?
Hi,
Either erase Block protection if Your programmer has such an option (see pic.) or use a new blanc chip.
B.R
WILLEM_95080.jpg
Knowledge is to share... so if I have helped just press [Thank You + Rep.]...
Ok thanks for the help I'll try and get another programmer like the Willem has I don't think xprog can do this
UPA does it.
Best place to get UPA from ?
Im in the UK
Bookmarks