Magic 4C chips help any one.

[super jumbe]

Lads got an issue, friend of mine he is locksmith but he at the moment stuck in South Africa, I gave him 10 4C chips and he turn them to 4C Magic chip, I don’t have AVDI is there any other tools or a simple way to turn to magic 4C chips.

[super jumbe]

Any one tried this tool, Is this tool any good for that job?
4C 4D ID4D(60) chip for Magic Wand 4C 4D chip generator

magic-wand.jpg

[rapidlocksmiths]

you can do this with any tool capable of writing to a 4c chip . just write this to a 4c cloning chip and you have a magic chip , you only need one then clone from it

7E 00 00 00 00 00 00 4C
00 00 00 00 7E 00 00 01

[Meat-Head]

Leech mode:-

what is a magic chip please?

[rapidlocksmiths]

magic chip is the above basic logic that when written to a cloning chip like GTI , ck100, TPX1 , Z4C etc , will start and run alot of toyota , suzuki , mitsi vehicles but mainly older toyota 4c systems just as a coded key will with no issues , a master key for these if you like , doesnt work on ford if any one asks . been around for years and was a secret held by some but is now fairly common knowledge , saves removing ecu and eeprom , abrites added it to their software years ago as did the fvdi copy.

[Meat-Head]

Leech mode:-

so it a NON magic you clone customers orginal key, onto but a magic on you “insert key programmer - add key done”

[super jumbe]

Thank you rapid very much appreciated, look I had a last chip when I checked the reading it’s deferent from the one you have mentioned, but this chip could have been mixed when packing the reading says.
7E 00 00 00 00 07 00 00
7E 00 00 00 00 07 00 00
Mind you could it be even possible both chips do the same work!

[rapidlocksmiths]

Leech mode:-

so it a NON magic you clone customers orginal key, onto but a magic on you “insert key programmer - add key done”

your not cloning customer key , if all keys lost , you write this logic to a 4c cloning chip like ck100 , gti , z4c , silca electronic heads keyline gk24 etc , and the car will start and run fine on the key with this chip , works on most older toyota 4c systems as well as some suzuki and mitsi 4c systems.

magic no , just a master code for some old 4c systems , i keep one ready made on the van and just clone from it when needed.

[rapidlocksmiths]

Thank you rapid very much appreciated, look I had a last chip when I checked the reading it’s deferent from the one you have mentioned, but this chip could have been mixed when packing the reading says.
7E 00 00 00 00 07 00 00
7E 00 00 00 00 07 00 00
Mind you could it be even possible both chips do the same work!

possible i guess , ive always used the logic listed , been using this for many years now before it was common knowledge and avdi included it , its been on so many forums since that very few still eeprom these old 4c models

[Meat-Head]

very few still eeprom these old 4c models

For us leechers https://www.digital-kaos.co.uk/forum...-keys-solution

[super jumbe]

Thanks every one.

[rapidlocksmiths]

some machines will not write the full logic to the cloning chip , on these you just write below logic

7E 00 00 00 00 00 00
00 00 00 00 7E 00 00

works same , when read on a reader the full logic will be shown , but above is adequate .

make one , keep it on the van as a master and just clone from it every time you need it , or if you have abrites just make with this.

[Manta1600]

What tool can write the full stream ?

or I'm missng something?

[kemaster]

What tool can write the full stream ?

or I'm missng something?

With Zed Bull you can manually input all data you need

[ray-ray]

No magic it’s tricking the ecu, the keylogic held in the chip is the logic for a unprogrammed slot. So a slot that has no value or transponder id is why the car is starting. Now there a key count for all keys programmed into the slot.