Corsa D display SaFE match

**ivaylo5225** · 6th April, 2020, 10:56 AM

Hello colleagues,

I bought another radio and now the display shows SAFE. The car is Corsa D 2007 with CD30MP3 DelphiGrundig.

I attach eeproms from display and radio. opel display c56-8.rar

**shooting** · 6th April, 2020, 12:04 PM

Originally Posted by ivaylo5225

Hello colleagues,

I bought another radio and now the display shows SAFE. The car is Corsa D 2007 with CD30MP3 DelphiGrundig.

I attach eeproms from display and radio. opel display c56-8.rar

Display dump needs to be in 8bit not 16bit....
Here is your radio set to virgin....

wbr

**ivaylo5225** · 6th April, 2020, 01:47 PM

opel displ.rar here is the 8 bit version, thanks in advance !

**shooting** · 6th April, 2020, 02:24 PM

Originally Posted by ivaylo5225

opel displ.rar here is the 8 bit version, thanks in advance !

Pair using 3826

wbr

**modzzo** · 9th April, 2020, 07:10 PM

hi can i get pin from gid and cid thanks

**rafal** · 9th April, 2020, 07:13 PM

gid: 8567.........

**shooting** · 9th April, 2020, 07:15 PM

Originally Posted by modzzo

hi can i get pin from gid and cid thanks

GID is 8567 and CID needs to be in 8bit not 16bit

wbr

**modzzo** · 9th April, 2020, 07:19 PM

Originally Posted by modzzo

hi can i get pin from gid and cid thanks

thanks i will try to do 8bit

**modzzo** · 9th April, 2020, 07:41 PM

try this thanks

**shooting** · 9th April, 2020, 07:46 PM

Originally Posted by modzzo

try this thanks

PIN = 3347

wbr

**modzzo** · 9th April, 2020, 08:29 PM

3347 is wrong i got 7 attempts left

**rafal** · 9th April, 2020, 09:28 PM

3347 is correct
part number : 13301079

**modzzo** · 10th April, 2020, 05:37 AM

does anyone have corsa d gid divorced dump file? or cd30 and gir paired dumps thanks

**shooting** · 10th April, 2020, 08:45 AM

Originally Posted by modzzo

3347 is wrong i got 7 attempts left

Use this dump and re-register, then pair using 3347

wbr

**uranio00** · 10th April, 2020, 07:14 PM

Hello guys, I came across a 2014 GID 13452422.
The GID is unmarried so i opened it to read the eeprom.
Unfortunately it seems theyhabe changed something in the design: there is not any eeprom on the PCB. I suspect the code is stored into the micro. Anybody have been dealing with it?