Iveco Daily Body Computer Marelli needs to be cloned

[zzappy]

Hi,
I need to clone a bcm body computer marelli, but I don't know how.
I've read around that i could do it with UPA (I have it genuine)

These are references numbers:
69502289 503440070208 NBCS20A.01

Waiting for your help,
best regards and stay safe!
Tks!

[greyg]

If you have used BCM 69502289 you only copy eep 95320.

[zzappy]

If you have used BCM 69502289 you only copy eep 95320.

did you test it already?
i mean do u have similar experience about this situation? i'm reading around on the web lots of info but it seems that the only tools can do this clone are i/o terminal or smoke, but both have problems with nec processor bcm. Or pin/carpass problems, or proxy alignment problems and so on...
what i need to be sure is: do i need only to swap/copy 95320 then nothing else should be done?
tks a lot for helping me mate!

[Briankotze]

Everthing is in eeprom. Read eeprom and write eeprom. Just make sure u dont corrupt eeprom. So have knowledge of reading eeprom and u will be fine. Safe ori file for possible future use

[greyg]

did you test it already?

Many times. Only BCM number is important. If there are any differences you have to combine content with eep.

[ricked]

Hi,
I need to clone a bcm body computer marelli, but I don't know how.
I've read around that i could do it with UPA (I have it genuine)

These are references numbers:
69502289 503440070208 NBCS20A.01

Waiting for your help,
best regards and stay safe!
Tks!

if you do much ofthis work buy io terminal, all can be done via connectors, and yes i use it and it works great