Of course.
For example adr. 3A000 start block 0000 0E07
3A7B8: FFFF F1F8 (XOR of block No.)
3A7BC: 07B8 (1976dec) block lenght
3A7BE: CKS
WBR, Marek
Hello
need some advice/help. I changed km in dashboard with succes in BRP Can AM 1000. And i need calculate motohours. I have 335mth and need 120mth. I found mth in pflash 9s12xet256 in m3c continental ecu. But when i am doing any change my quad not start. It shows on dash "ecu not recognized". I made different files and always the same result. Can anyone help with this? What I am doing wrong? ANy checksum needed or anything else?
I attached ori file and moded file.
Thanks
Of course.
For example adr. 3A000 start block 0000 0E07
3A7B8: FFFF F1F8 (XOR of block No.)
3A7BC: 07B8 (1976dec) block lenght
3A7BE: CKS
WBR, Marek
Please do not spam my PM asking for help.
Use forum, that is why we are here.
All ok......
You'll need pictures from all sides mate .... ? PremierD
Hello everyone.
I have brp g 2, I read the firmware and I want to change the clock.
I have 359h55, I want 90 hours (Ecu m3c)
but I would also like to understand how the meaning changes.
do you have calculators ready?
maybe some kind of program or software?
thank
Last edited by breaker13; 19th March, 2021 at 01:47 AM.
if you change hours in ecu need correct cheksum, for example ktag correcting only in maps area
Last edited by karmoranas; 6th December, 2021 at 11:55 AM.
If i Help , please push Thanks
Hi All,
Can someone please correct the MH on the attached dump for me,
_ CAN-AM 800
_pflash / 9s12xet256 / m3c continental /
_Original - 985MH
_required - 210MH
many thanks in advance
Bookmarks