Hardcut request for 2.0 TDI 140 - Siemens ECU

**khaos87** · 13th April, 2020, 03:37 PM

Hello mates, i need hardcut only at 4400rpm for that VW 2.0 TDI 140

SW: 6576285395
SW upg.: 03G906018 8096

original file from the car is attached..

**motocrazy** · 13th April, 2020, 06:08 PM

hardcut 4400rpm
test and report
pass pm

**khaos87** · 14th April, 2020, 01:44 PM

Thank for the try but no hardcut.. nothing happens.. Anyone else ?

**chrisimerk** · 14th April, 2020, 02:44 PM

Originally Posted by khaos87

Thank for the try but no hardcut.. nothing happens.. Anyone else ?

here you go hardcut @ 4400

pass in pm

**khaos87** · 14th April, 2020, 05:08 PM

Originally Posted by chrisimerk

here you go hardcut @ 4400

pass in pm

Thank you for the try, but again with no luck... no hardcut for that sh*t

**DiegoStud** · 14th April, 2020, 05:38 PM

Hard one, can't tell I think it's either 498E8-5201rpm or 498EA-6000rpm.
Change them both, wouldn't do any harm.

**chrisimerk** · 14th April, 2020, 07:14 PM

yes this is a hard one i can easily do launch control on these but hardcut still testing solutions for me

**naskochipa** · 14th April, 2020, 07:27 PM

Originally Posted by DiegoStud

Hard one, can't tell I think it's either 498E8-5201rpm or 498EA-6000rpm.
Change them both, wouldn't do any harm.

To my knowledge, this ECU does not have an SVRL?

**chrisimerk** · 14th April, 2020, 07:31 PM

also these store the axis data you need for hardcut in other part of read so you need a bdm read to change axis data i have tested solution for bdm read still testing with obd reads the solution for bdm read is you change axis in duration maps but obd read dont read full axis

**khaos87** · 15th April, 2020, 12:05 AM

Originally Posted by chrisimerk

also these store the axis data you need for hardcut in other part of read so you need a bdm read to change axis data i have tested solution for bdm read still testing with obd reads the solution for bdm read is you change axis in duration maps but obd read dont read full axis

Mate i try it with Roarcuss solution on that ppd. and also didnt work... its ghost inside that ECU...

**mrjay88** · 15th April, 2020, 01:36 AM

This is my favourite ecu to work on this ecu does not have svrl its very unique i have a siemens ppd ecu in my golf so here you go pal 100000% tried and tested please dont forget to thanks and rep pass in pm

**DiegoStud** · 15th April, 2020, 05:24 PM

Originally Posted by naskochipa

To my knowledge, this ECU does not have an SVRL?

Did this not work for you Nasko?

mrjay88- are you refering to this particular software version or PPD1.1? Very unique and surprising.

Must say these are my least favourite ECU

**mrjay88** · 15th April, 2020, 06:23 PM

Originally Posted by DiegoStud

Did this not work for you Nasko?

mrjay88- are you refering to this particular software version or PPD1.1? Very unique and surprising.

Must say these are my least favourite ECU

no mate just the siemens ppd ecu in general is unique doesnt matter if its a ppd1.1 or 1.2 etc.. i love tuning them but no body seems to like them

**TuningInside83** · 15th April, 2020, 06:31 PM

also these store the axis data you need for hardcut in other part of read so you need a bdm read to change axis data i have tested solution for bdm read still testing with obd reads the solution for bdm read is you change axis in duration maps but obd read dont read full axis

: Rofl:

**mrjay88** · 15th April, 2020, 06:36 PM

no you dont need a full bdm dump for this ecu to make a popcorn thats bullshit theres otherways that i have worked out and works everytime so stop speaking italian this an english forum am not stupid this ecu is what i mainly deal with i speak from experience i got thanks and rep from the file i made clearly meaning my map works