ecu peugeot 407 bosch 0281011558

**sueldacables** · 16th April, 2020, 09:11 AM

Greetings, I cloned this ecu and it seems that I made a mistake, now the car does not start, I thought that the problem was in bsi but no, fine, the problem appears in the ecu in eeprom 95160.
Is there someone who has a reading of an ecu equal to 95160 to be able to compare or if you can check my file and see if it has any fault ?? thanks in advance, this work has been complicated, thanks again.

bosch 0281011558 1.6 hdi eeprom 95160 in ecu

**ricked** · 16th April, 2020, 09:16 AM

reference for others:

0281011558 = EDC16C3-9.17

**sueldacables** · 16th April, 2020, 09:34 AM

Thanks Ricked,

the problem is injection now or injection actuator ,,,error dtc P2148
and it does not start, before this the car started well.

**ricked** · 16th April, 2020, 08:14 PM

your file is partial so indeed eeprom not ok

with what did you read it?

in attachment 2 files to compare your self

a solution maybe in your case is take a eeprom file i did upload and make 1 virgin and 1 immo of and try

**ricked** · 16th April, 2020, 08:30 PM

try these files incl yours

ask pass in PM only

**sueldacables** · 17th April, 2020, 05:41 PM

Thanks for your help, it is read as 95160 with UPA, please pass and compare or try to load mine with its modification, thanks again

**sueldacables** · 17th April, 2020, 06:20 PM

if i finally upload the virgin file, do i have to encode with peugeot planet? or with another tool, thanks

**kiszka** · 17th April, 2020, 11:02 PM

Originally Posted by ricked

your file is partial so indeed eeprom not ok

with what did you read it?

in attachment 2 files to compare your self

a solution maybe in your case is take a eeprom file i did upload and make 1 virgin and 1 immo of and try

man, what are you talking about
these are your files, they suck,
sueldacables, the file size is correct
place the original and new ecu eeprom

Originally Posted by sueldacables

if i finally upload the virgin file, do i have to encode with peugeot planet? or with another tool, thanks

eeprom virgin, you need to do pp2000 programming

**ricked** · 18th April, 2020, 10:47 AM

Originally Posted by kiszka

man, what are you talking about
these are your files, they suck,
sueldacables, the file size is correct
place the original and new ecu eeprom

eeprom virgin, you need to do pp2000 programming

these are full reads from other 0281011558 dude so what is your problem???

EDIT

ktag writs exta bits from 0007099B (double) so i see my confusion also no need to get rude, im also trying to help here

**volorucinski** · 18th April, 2020, 11:42 AM

Kizska, ricked... I have haad this issue with the same ecm, a month trying to find solution with spare parts and repreogramming... Useless... Immo offed with other software, removed eep, nothing worked, until i've had this thought that abrites could do it. So, it went good in 3minutes.... Finally solved with fvdi - immo off by obd. Sueldacables, i hope you're reading this...

**sueldacables** · 19th April, 2020, 04:20 PM

Ricked is helping a lot, if I read the message to work with fvdi but I don't have it, only pp 2000 clone, I will try anyway with what you provide, the problem I think was a bad reading with UPA the first time and just save that file when I always read it and save two or more times, I don't know what happened ...., thanks I'll try

**ricked** · 19th April, 2020, 04:42 PM

Originally Posted by sueldacables

Ricked is helping a lot, if I read the message to work with fvdi but I don't have it, only pp 2000 clone, I will try anyway with what you provide, the problem I think was a bad reading with UPA the first time and just save that file when I always read it and save two or more times, I don't know what happened ...., thanks I'll try

use the ori file that i make viring (ecu pinilla virgin) and use pp2000 to adapt to your car