Complete disconnection of the EGR in PSG16

[HER13]

I try to figure it out myself, I read a lot of information on the Internet, which is interpreted differently, so questions arise.
To completely disable USR in PSG16, you must:
1. In the error mask, it is necessary to write a zero value in the status of error 0400.
1.png2.png
2. It is necessary to write zero values ​​to the hysteresis map, and there are also questions here:
- What does the value 00258 mean, which changes to 00002?
- What do the values ​​00450 and 00900 mean, which change the values ​​to 65565 (FFFFF) and 00000?
5.jpg
- Do I understand correctly that:
- 00002 - the number of values ​​in X (highlighted in yellow)?
- The values ​​00000 and 01000 are highlighted in red. Is this the speed range the USR is running on?
- Values ​​04100 and 03900 - amount of injection highlighted in white?
6.jpg
- What do the meanings of white and red in the image below mean?
7.jpg

Who can tell more information, really want to understand.
Thanks.

[JoeBB]

Must have egr hysteresis to 0 and DTCS off

[HER13]

Can you show by example how it should be using my pictures and answer the questions?

[HER13]

Please do not be silent, tell me. I study and try to figure it out.

[alonedark]

Post Ori file and check for you

[HER13]

PSG16 Vectra C

[alonedark]

What tool do you use for reading, is bad , i can Put a example id you wan to learn

[HER13]

The file is cut from the TECH2 map.
Ready to learn from your examples.
Thanks.

[alonedark]

Do you khow remove un hex files, down picture is removed, up picture is original and now you need use your brain.

[alonedark]

But if you havent original file cant do .easy , for all member change 01c2038401c20384 bu ffff0000ffff0000 and you have remove egr for unplug and now remove dtcs, you Need learn remove dtcs too,anóther day second lesond. Bye see you soon




chachachan

[HER13]

01c2038401c20384 bu ffff0000ffff0000

I understood this and realized that this is a switch, but I can’t understand why exactly these values ​​(450 and 900)?

[alonedark]

I Dont understand that the people want to learn with no original files is stupid.

[HER13]

The source file contains 450 and 900. What do these numbers mean?

[HER13]

Do you khow remove un hex files, down picture is removed, up picture is original and now you need use your brain.

I found all the values.
I understood what values ​​should be changed.
But what do these numbers mean?
What actions in the car control these numbers?

[HER13]

can anyone answer these questions