OP-COM SOFTWARE REQUEST

[ramalho]

Thank you Fantomel !!!

[gdoherty7]

thanks hoping this works for my 64 plate vauxhaul

[abbialy]

Thanks Fantomel, all work well

[nightmare1]

Hi Guys,
Maybe someone share
OP-COM 190311a Advanced or
OP-COM 191022a Advanced version?
Working good on HQclone?
Cheers

[paulthejoker]

salve ragazzi ho un clone opcom che dalla foto fantamel sembra buono e non è falso ... comprato su aliexpress .. ho la versione 1.59 per con il software 120309a+131223d che ho vedo errori e alcuni blocchi di misura e nessun blocco di misura motore e altro ancora . .. cosa posso fare per far andare tutto bene? devo aggiornare il firmware? hai firmware e software che funzionano tutti con questo opcom v.5? la mia auto è una opel meriva b anno 2011 A13DTE

foto my driver opcom v5

[/URL]

[Mario6]

paulthejoker

Hi.
Read Fantomel's post number 18 carefully on the page. 2. You have everything there: from manuals to links to his new Opcom software on yandex.
(and english please)

[volodin69]

FANTOMEL IS THE BEST. PUSH THE F*ING BUTTONS FOR THIS MAN. HE GAVE YOU ALL, ON THE PLATE. IF YOU CANNOT HANDLE THE INFO, USE THE SEARCH BUTTON!
And must have V5 version, with ori PIC.

[Mario6]

Mate you are right. I think so too (best regards for FANTOMEL) but everyone started out once and was "green". There were some things he didn't notice.
His version is good V5.

[paulthejoker]

i gave thanks to fantomel but i don't understand which complete software is good to have the engine read in real time and more .. if i have to make changes or not ... my opcom is not HQ but opcom china with real chip..i am to test all these posted? sorry

[volodin69]

I've been testing all. Following his all posts, i have this conclusion. 2016 advanced does all. As original. 2020 proffessional does it all.
Do what you think and test everything, as I did. And... post here,maybe we can all have part of most of the best from our tests. This is all that I want to say. I did my research and posted my conclusion. If you get more of this, just post. Punkt!post edit. Do modify your ori pic opcom to Version C, and all will be good.

[paulthejoker]

thanks you FANTOMEL!!!

[Ser9ei]

Is it a right china's version of the op-com?
The PIC chip is original, and tested.
CAN Transceiver chip is TJA1040 (instead tja1050 as on the V5 version)

op-com_new version:
IMG_0496[77].jpg

[Mario6]

Is it a right china's version of the op-com?
The PIC chip is original, and tested.
CAN Transceiver chip is TJA1040 (instead tja1050 as on the V5 version)

op-com_new version:
IMG_0496[77].jpg

Hi. Looks like a good "OPCOM NEW" but with the guys from China "you never know". If you can change FW and continue to connect to the car, it's OK.

[fantomel]

These 2 pictures will give u all, related to TJA, l9637.... and so on. I prefer the old ones without standby active, but you can't find them anymore.

[Ser9ei]

Thanks, guys, for your feedback!
I tested my OP-COM with the latest software ("OP-COM_200603a") and looks like it work.
Could you please tell, is it possible upgrade my device according to the instructions from the "1.CH-CAN Support(REV.5 ONLY).pdf " manual?