OP-COM SOFTWARE REQUEST
Register
Page 1 of 15 12345611 ... LastLast
Results 1 to 15 of 213
  1. #1
    Top Poster
    fantomel's Avatar
    Join Date
    Mar 2009
    Location
    Us
    Posts
    163
    Thanks Thanks Given 
    55
    Thanks Thanks Received 
    2,499
    Thanked in
    88 Posts

    Default OP-COM SOFTWARE FREE 4 ALL

    As you know some time ago i asked for some help and you can see the result in my last post :
    https://www.digital-kaos.co.uk/forum...=1#post4058794

    Ok, you will wonder why i ask for these installers

    I plan a little surprise and i would love my surprise to be .... as complete as possible, so because of this i ask for a little support meaning
    OP-COM or VAUX-COM installed or installer kits Professional or Advanced that are from 2012 UP only English and are not in the list bellow.
    Version Firmware Type
    131223c_EN 1.59 Professional
    131223e_EN 1.60 Advanced
    141204d_EN 1.63 Professional
    150406d_EN 1.64 Professional
    170330a_EN 1.65 Professional
    170823c_EN 1.66 Professional
    181022a_EN 1.67 Professional



    I know for a fact that there are also other versions then these as for example Advanced 161001a, so i am asking for your help ( you can write here or on PM)
    Attached Images Attached Images
    Last edited by fantomel; 6th February, 2021 at 02:47 PM.
    If you like my post and it helped you please press THANKS.

  2. The Following 145 Users Say Thank You to fantomel For This Useful Post:

    2lrocco (26th September, 2022), Achie007 (5th February, 2022), Adi202 (30th March, 2023), Ahmet19300 (28th March, 2023), Ahmetalhan (20th September, 2023), ahmetuzun (12th March, 2023), Albrex55 (19th November, 2020), alp-toni (15th March, 2022), alusta (12th February, 2021), Andreastech81 (19th May, 2021), apavlic008 (8th May, 2021), bar72 (9th March, 2023), bar7212345 (25th October, 2021), bergbahn (24th September, 2020), berti77 (20th July, 2023), biber40 (22nd March, 2021), birisi (9th October, 2020), bonkersiak (13th June, 2023), boray1 (23rd July, 2023), brodaty (1st March, 2021), CARPRO2020 (29th April, 2020), chillaaa3169 (21st November, 2021), chrisgill (11th June, 2022), ChrisGout (17th March, 2023), Claudio33 (6th November, 2020), coco20 (27th September, 2021), cone96 (22nd August, 2021), corey2k (6th August, 2022), critix (21st June, 2023), Damion01 (24th November, 2021), daniersms (25th April, 2020), davekeydhc (10th October, 2023), Deivid Roza (3rd April, 2022), dfssdfsda (19th May, 2021), diag1001 (17th December, 2023), dimet (26th June, 2022), Dobermann (19th November, 2022), dyc (26th January, 2024), EGELETTRONICA (4th May, 2022), electrohicham (28th April, 2020), eric haagmans (6th December, 2022), eszimi (25th April, 2021), Evlagor (4th April, 2023), Faanatyk (15th November, 2021), fabisoft (26th November, 2021), Falcoverde76 (20th March, 2024), focussatitalia (12th July, 2022), foorestico (31st January, 2021), gerixusyu (26th May, 2022), GT-INFO (10th July, 2020), GuesWho (10th February, 2021), Gurbettekises (7th February, 2022), Gyula84 (4th May, 2021), hackerboy64 (9th April, 2023), icedearth (3rd September, 2021), jgdf (3rd September, 2023), jo?o antonio (11th December, 2022), JohnD187 (19th May, 2021), JonCunningham (25th February, 2021), JUANLUSKODA (25th February, 2024), jusna (11th March, 2023), kakamatyi (2nd June, 2021), karageorgos (28th April, 2020), Kehveli12 (2nd September, 2021), kikis (24th April, 2020), kodiran (16th April, 2021), kogmedia (28th October, 2022), komed (27th November, 2022), Kowalsky (7th December, 2023), Kranjac (25th January, 2024), LightMatic (30th October, 2023), LukeJ1991 (14th January, 2024), lumetan (28th May, 2022), lupu_sandu (25th April, 2020), marcin55246 (30th August, 2023), Mario6 (28th June, 2020), Martinasek (26th January, 2024), maxal66 (16th April, 2023), mikurin (22nd January, 2024), miroopel (26th January, 2022), mmiguel948 (18th October, 2023), MMK (6th December, 2021), MORKAS74 (27th January, 2023), mzabka (23rd September, 2021), Nemrod (7th October, 2021), no1baggiesfan (25th May, 2021), nobrains (27th September, 2021), olymanta (3rd January, 2024), omarino (24th April, 2020), omarzoro (28th May, 2021), ombre57 (14th August, 2021), opel91025 (6th July, 2021), paro44 (27th April, 2020), paulthejoker (20th July, 2021), Pauluss (21st December, 2022), poasiano (5th December, 2023), prcl (19th March, 2024), RedNix (6th July, 2020), ricked (25th April, 2020), Rinoo (13th September, 2021), Rinor (8th October, 2021), robertocarlos75 (13th June, 2022), rubycon (8th June, 2021), russell (6th October, 2023), rzk (24th February, 2023), Sals (30th September, 2023), Sanyamaci (1st April, 2023), Ser9ei (19th May, 2022), serjikel (4th August, 2021), speedy100 (18th January, 2024), StefanS (28th January, 2022), steva.vojnovic (9th April, 2021), stevieg68 (5th April, 2023), stiloboro (8th April, 2022), SUHOJ (26th February, 2024), super80 (22nd February, 2024), svelent (6th August, 2021), Tassoss (18th January, 2024), tempra56 (21st February, 2023), Tequila boydell (27th April, 2023), TheSky (21st January, 2022), tortsen (14th April, 2023), Trrrr69 (2nd January, 2024), turgut (1st July, 2021), Ukrscan (29th June, 2021), vcelar (16th August, 2021), vdiag (4th November, 2021), vladimius (7th August, 2021), volodin69 (20th July, 2021), wp7410 (5th May, 2021), xJlaIIax (21st March, 2021), Yhoni (1st September, 2021), yysnet (3rd February, 2022), Zeemaister (14th January, 2024)

  3. #2
    Top Poster
    fantomel's Avatar
    Join Date
    Mar 2009
    Location
    Us
    Posts
    163
    Thanks Thanks Given 
    55
    Thanks Thanks Received 
    2,499
    Thanked in
    88 Posts

    Default

    Since yesterday my list of versions that i have is like this:

    OP-COM Version Firmware Type


    110530a EN 1.44 Advanced
    120309c EN 1.45 Professional
    121231i EN 1.47 Professional
    131223c EN 1.59 Professional
    131223e EN 1.60 Advanced
    141204d EN 1.63 Professional
    150406b EN 1.64 Professional
    150406d EN 1.64 Professional
    170330a EN 1.65 Professional
    170823c EN 1.66 Professional
    181022a EN 1.67 Professional


    I will take also kits or installed versions from non genuine interfaces that are not in the list and also just in English language.


    If someone has Advanced versions newer then 2013 in English please do share
    If you like my post and it helped you please press THANKS.

  4. The Following 27 Users Say Thank You to fantomel For This Useful Post:

    AMDOR (27th March, 2021), Audipete (23rd September, 2021), bar72 (9th March, 2023), bonkersiak (13th June, 2023), boray1 (23rd July, 2023), davekeydhc (10th October, 2023), gsi_0890 (10th November, 2021), icedearth (3rd September, 2021), jusna (11th March, 2023), kakamatyi (2nd June, 2021), lynxman (14th February, 2021), Mario6 (18th March, 2021), MMK (6th December, 2021), Nemrod (7th October, 2021), paro44 (27th April, 2020), paulthejoker (20th July, 2021), radrad10 (12th March, 2021), ramalho (6th June, 2021), rzk (24th February, 2023), savosi (9th February, 2022), Tassoss (18th January, 2024), tortsen (14th April, 2023), Trrrr69 (2nd January, 2024), volodin69 (20th July, 2021), yuppi007 (16th June, 2021)

  5. #3
    DK Veteran
    Join Date
    Feb 2010
    Posts
    397
    Thanks Thanks Given 
    11
    Thanks Thanks Received 
    13
    Thanked in
    13 Posts

    Default

    I have op com 2014 but inside folder it has vag com these are instructions with it perhaps you recognize it?
    primero instalamos el programa


    conectamos el op-com al ordenador para instalar los drivers


    abrimos el OCflash y actualizamos el op-com con el firmware 1.59


    y por lo ultimo abrimos el software vaux-com (es la version 2012 ...pero esta modificado (actualizado) para 2014)


    solo funciona con la version B ( todos los op-com clones China son la version B) agunos modulo mas modernos como immo de la astra J y otros mas de poca importancia FUNCCIONAN solo con la version C y D que de momento no existen como clones


    MUY importante..antes de actualizar el op-com es necesario saber que version tenemos asi que abrimos las carcasa del op-com y en la placa base
    tiene que estar escrito la V5 si pone V6 no se puede actualizar(es nesesario hacer algunas modificaciones (La V6 mejor no actualizarla sin hacer antes los cambios ...se puede bloquear)

  6. The Following User Says Thank You to mtechno For This Useful Post:

    Tassoss (18th January, 2024)

  7. #4
    Newbie
    Join Date
    Feb 2014
    Posts
    16
    Thanks Thanks Given 
    4
    Thanks Thanks Received 
    1
    Thanked in
    1 Post

    Default

    181022a EN 1.67 Professional last one . have a opcom obd v2 tying to find drivers for it an cud it be up dated to work on last version

  8. The Following User Says Thank You to batrst For This Useful Post:

    Tassoss (18th January, 2024)

  9. #5
    Junior Member
    Join Date
    Nov 2018
    Location
    Bangor Ni.
    Posts
    28
    Thanks Thanks Given 
    7
    Thanks Thanks Received 
    2
    Thanked in
    2 Posts

    Default

    Can i have the 1.67 version please ? Or any what has a Gm Cruze 2.0 diesel in it . Thanks

  10. The Following User Says Thank You to Pofi87 For This Useful Post:

    Tassoss (18th January, 2024)

  11. #6
    DK Veteran

    Join Date
    Dec 2014
    Location
    PL
    Posts
    1,179
    Thanks Thanks Given 
    1,267
    Thanks Thanks Received 
    1,710
    Thanked in
    689 Posts

    Default

    Quote Originally Posted by Pofi87 View Post
    Can i have the 1.67 version please ? Or any what has a Gm Cruze 2.0 diesel in it . Thanks
    If you have a regular Opcom China clone with FW minimum 1.45 use Vaux Com 120903a. There from 2010 to 2012 is the Chevrolet Cruze engine diagnostics.
    2010y-Z20S1
    2011y-Z20S1, Z20D1,
    2012y-Z20D1.
    There is no Chevrolet Cruze diagnostic option on Opcom 170823c FW 1.66. I do not know if 181022a FW 1.67 has the Cruze diagnostic option.

  12. The Following 2 Users Say Thank You to Mario6 For This Useful Post:

    Tassoss (2nd January, 2024)

  13. #7
    Junior Member
    Join Date
    Nov 2018
    Location
    Bangor Ni.
    Posts
    28
    Thanks Thanks Given 
    7
    Thanks Thanks Received 
    2
    Thanked in
    2 Posts

    Default

    Hi. Tried that version (120903a) has cruze in it just its missing that engine file what i need...IMG_01072020_224002_(1080_x_1080_pixel).jpg Can someone give me a good version .Thanks

  14. #8
    DK Veteran

    Join Date
    Dec 2014
    Location
    PL
    Posts
    1,179
    Thanks Thanks Given 
    1,267
    Thanks Thanks Received 
    1,710
    Thanked in
    689 Posts

    Default

    Try this version fake Vaux Com 120903a plus 160115a Langdata.
    Attached Files Attached Files
    Last edited by Mario6; 14th September, 2021 at 03:42 PM.

  15. The Following 23 Users Say Thank You to Mario6 For This Useful Post:

    alusta (12th February, 2021), biela (1st October, 2023), brodaty (1st March, 2021), coco20 (27th September, 2021), costa sys (8th April, 2023), daquima (2nd August, 2021), Dexxxx (7th July, 2020), direx (17th March, 2023), Gurbettekises (14th March, 2023), hmagga (7th October, 2020), kodiran (16th April, 2021), lynxman (14th February, 2021), mchelli (28th April, 2021), ombre57 (14th August, 2021), payomag (10th March, 2024), Pofi87 (2nd July, 2020), profesor0127 (26th January, 2022), rumensivanov (13th April, 2021), semga (21st December, 2021), Tassoss (2nd January, 2024), ummagumma64 (7th June, 2022), Waclaw (23rd August, 2021), xJlaIIax (21st March, 2021)

  16. #9
    Junior Member
    Join Date
    Nov 2018
    Location
    Bangor Ni.
    Posts
    28
    Thanks Thanks Given 
    7
    Thanks Thanks Received 
    2
    Thanked in
    2 Posts

    Default

    Thanks , seems to be good for my job , will have the cruze back on saturday , hopefully now not for time waisting. I will report after i tried on the car.

  17. #10
    Junior Member
    Join Date
    Nov 2018
    Location
    Bangor Ni.
    Posts
    28
    Thanks Thanks Given 
    7
    Thanks Thanks Received 
    2
    Thanked in
    2 Posts

    Default

    So yesterday tried it , connects to ecu but couldnt read live data parameters etc. Just 3 red lines where the data should be. Whit all year what has it , and every 2.0 diesel. I want to teach up a dpf pressure sensor , and do a regen . But no luck.. tried ( snapon modis ultra, lunch, tech2,multi ecu , opcom, what worked whit it it was a hella diag what done for first so atm sorted . Thanks for the help

  18. #11
    DK Veteran

    Join Date
    Dec 2014
    Location
    PL
    Posts
    1,179
    Thanks Thanks Given 
    1,267
    Thanks Thanks Received 
    1,710
    Thanked in
    689 Posts

    Default

    It can be like that. I once checked Opel Insignia 2.0 163Ps 2010y and there were also no DPF measuring blocks (- - -). In the near future I will be checking Chevrolet Cruze 2.0 163Ps with the help of Opcom 15EN, 16 Pl, Vaux Com 16EN (HQ clone). If you are interested, I will write if it correctly reads the measured value blocks of the engine and DPF.

    EDIT:

    I used Opcom 150406d on a Chevrolet Cruze 2012y 2.0 163PS. Only in the motor is it possible to read blocks of measured values and programming. In Other calculators, you can only read and delete error codes.
    Attached Images Attached Images
    Last edited by Mario6; 6th July, 2020 at 01:25 PM.

  19. The Following User Says Thank You to Mario6 For This Useful Post:

    Dexxxx (7th July, 2020)

  20. #12
    Newbie
    Join Date
    May 2010
    Posts
    2
    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Default

    Can somebody share 181022a_EN 1.67 Professional please? Thanks

  21. #13
    DK Veteran

    Join Date
    Dec 2014
    Location
    PL
    Posts
    1,179
    Thanks Thanks Given 
    1,267
    Thanks Thanks Received 
    1,710
    Thanked in
    689 Posts

    Default

    Quote Originally Posted by maktub View Post
    Can somebody share 181022a_EN 1.67 Professional please? Thanks
    Here you go.

    https://www.digital-kaos.co.uk/forum...ighlight=opcom

  22. The Following 2 Users Say Thank You to Mario6 For This Useful Post:

    awesome88 (16th May, 2022), jusna (11th March, 2023)

  23. #14
    Top Poster

    Join Date
    Sep 2016
    Location
    UK
    Posts
    134
    Thanks Thanks Given 
    26
    Thanks Thanks Received 
    3
    Thanked in
    3 Posts

    Default

    Can someone share 150406d_EN 1.64 please?

  24. #15
    DK Veteran

    Join Date
    Dec 2014
    Location
    PL
    Posts
    1,179
    Thanks Thanks Given 
    1,267
    Thanks Thanks Received 
    1,710
    Thanked in
    689 Posts

    Default

    Quote Originally Posted by fogducker View Post
    Can someone share 150406d_EN 1.64 please?
    Here you go. SW for HQ Clone.

    pass bukiet
    Attached Files Attached Files
    Last edited by Mario6; 9th November, 2021 at 10:34 PM.

  25. The Following 20 Users Say Thank You to Mario6 For This Useful Post:

    Albrex55 (26th November, 2021), alusta (12th February, 2021), artip (30th May, 2021), awesome88 (16th May, 2022), bar72 (9th March, 2023), brodaty (1st March, 2021), costa sys (8th April, 2023), dfssdfsda (19th May, 2021), fogducker (6th November, 2020), Gurbettekises (24th September, 2023), kastissu (25th February, 2022), kosina (29th December, 2023), lynxman (14th February, 2021), pepper (14th February, 2021), Pupsi2023 (2nd April, 2023), rumensivanov (13th April, 2021), Sals (30th September, 2023), sarigol45 (28th June, 2022), torzet (2nd July, 2021), vampman (11th May, 2021)

 

 
Page 1 of 15 12345611 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.