rob h (24th May, 2020)
hi all i have a 2010 vw crafter
the ezs has been stolen i have a new unit can some one guide me to whats the procedure to adapt a used ezs i have vvdi prog and VCDS
Have read out Pin from ECU but need the Pin from the new ezs to adapt for car. channel 50
Have read out the 9S12 on the new ezs but can not decode the information.
Here you have the files from the ezs and the ecu .
hi there the Mask is : 1L15Y ID:411
Best Regards
The part number for the eis is
vag number 2E0905843D
Mercedes number on che same eis is 9069003803
Per
Last edited by digitaleksperten; 28th May, 2020 at 06:15 AM.
rob h (24th May, 2020)
Your ezs dump, there is no pin and cs.
How did you read it?
Make sure that the wires you solder on the pcb, dont touch any other parts on print!
Easiest way, to to get the car running, is immo off, and a elv emulator.
Last edited by rob h; 22nd May, 2020 at 08:52 PM.
why is it i am starting to see a trend in stolen ezs??
The ezs is brand new from vag have read it with vvdi prog. try to adapt it with VCDS go in to immobiliser and adapt for car have org pin from ECU 03960
I was just thinking that they have put 12345 or 00000 01231 in the ezs so when i adapt it i have to put the original pin and then the pin is has to be ?.
The data i have read out from ECU.
Pin number 03960
CS : 71A3B925CF353F
MAC: 7763911A
Best Regards
Per
doctore (24th May, 2020)
If you find someone with a online vag account, it should be easy.
And please do post the ezs flash, it would really help others out.
Try this eprom and flash and collect!
Power class FE
Hi i have changed my original oplade with all data
Best reagards
Per
Hi now i have flash the eeprom but when i try to flash the flash the program says
Chip crack failure, please confirm the chip type and connection right, then try again !
No it is not possible to rewrite the old eeprom data back again because is says the same
Chip crack failure, please confirm the chip type and connection right, then try again !
It looks like the password is changed in the eis )EZS modul now the vvdi prog can not hack into the modul any more
I remember, vvdi not select good this mcu, select manual 1l15y secured 9s12dt384 or read id and select it, your ezs read in not good dump
Last edited by leaserhu; 24th May, 2020 at 07:47 PM.
To be sure, selected other reading options.
There are 256 384 and 512 flash sizes.
0L01Y MC9S12DT256_0L01Y
Mask:0L15Y ID:C410
Mask:1L15Y ID:C411
Mask:0M23S ID:C412
1L15Y 512
vvdiprog only lists the 384 and 512 in immo vw section
256 in immo benz section.
Only when you are sure, you start writing anything.
I prefer Rosfar, or even Orange5, still not vvdiprog on eis.
Last edited by rob h; 24th May, 2020 at 10:59 PM.
Bookmarks