Honda crv 2.2diesel 2009 HELP NEEDED!!!

**ziim** · 21st May, 2020, 10:22 AM

Problem after writed tuning file.
Honda hrv 2009 2.2diesel 103kw edc16.
Remapped via obd and now car wont start.
Okay taked ecu out and bench readed all files was good flash good. But no communication obd diagnostic too only engine ecu, other things work srs, abs.
Maby someone has a full bdm.
SW number:1037396105

**ziim** · 21st May, 2020, 10:25 AM

Where are those brilliant minds all over the world, and can help.

**dr3sl2** · 21st May, 2020, 11:12 AM

Hello, I recommend the following:
1. Write with KESS v2;
2. Go to "Recovery";
3. First set to "Setup" and write speed to "Minimal";
4. Go back, then write an original or stage on "Recovery".

That should work.

Greeting

**ziim** · 21st May, 2020, 11:29 AM

Writed like that modded file in car first time and now wake up error every time what tried. But bench read and write was all good

**dr3sl2** · 21st May, 2020, 11:36 AM

Are you sure that the written ECU file is in order? I made a car, almost the same year, and I have software number 528451. So I ask if the ECU is correct ....

**ziim** · 21st May, 2020, 12:01 PM

Ecu is correct. Checksums and file are correct. I had a one time years ago same problem with audi a6 and half a eeprom was deleted somehow via obd. And maby someone has bdm read on this kinda sw to compare my files.