you just need to download right asbuilt to BCM. If you will give me your VIN ill try to help.
hi, I purchased a full-optional ford focus from 2017, but the old owner replaced the xenon headlights with normal halogen headlights.....stupid man!
Now I have purchased two original xenon headlights on ebay (this is the code of one of the two headlights f1eb-13d154-bg), installed the forscan software and I bought the obd cable with switch, compatible forscan.
I connected the OBD cable to the car, started forscan, and in fact the old owner had set the headlights in the settings as halogen!
So I decided to set the headlights as adaptive bi-xenon and saved everything in memory .... but there is a problem, the headlights come on, but if I try to turn on the long headlights, these do not work and the focus gives me an alarm of lights failure!
what parameters do i have to set to correctly enable the headlights?
thanks a lot to all
fee17378-f6b7-4359-82f8-52c91378f9f0.jpg
In the photo you can view the Settings with halogen headlights.... thanks another time
Last edited by MikeBaxter; 24th May, 2020 at 01:03 PM.
you just need to download right asbuilt to BCM. If you will give me your VIN ill try to help.
MikeBaxter (1st June, 2020)
I dear, thanks
Inviato dal mio iPhone utilizzando Tapatalk
Last edited by MikeBaxter; 31st May, 2020 at 11:50 AM.
here you are
Bookmarks