Scenic Siemens SID 301

[diyre]

Hello everyone, I have a Scenic 1.5 DCI with Siemens ecu. When it wants, it stops, registering the internal fault code in ecu, P0601.Look for an equal second hand, copy it with BDM both flash and eproom. After mounting it, it started and stopped .... I started again and kept it at 2,000rpm ... when I left it at normal speed it stopped. Giving learning failure / configuration of injectors. Mount the old one with the multi-brand look, in the codes I found it not supported, enter to memorize, I got the photo of the delphi. I opened the lid and saw that they were siemens and all the same numbering.I put the Clip of renault, there is no place to put encode injectors, but the fault is there, and the car does not start.Mount the old one, I made a reading with a clip for when to change the ecu, mount the "new" one, save the data, and nothing, it continues with the same failure and without booting.Someone happened something similar to him?Greetings
Hello everyone, I have a Scenic 1.5 DCI with Siemens ecu. When it wants, it stops, registering the internal fault code in ecu, P0601.Look for an equal second hand, copy it with BDM both flash and eproom. After mounting it, it started and stopped .... I started again and kept it at 2,000rpm ... when I left it at normal speed it stopped. Giving learning failure / configuration of injectors. Mount the old one with the multi-brand look, in the codes I found it not supported, enter to memorize, I got the photo of the delphi. I opened the lid and saw that they were siemens and all the same numbering.I put the Clip of renault, there is no place to put encode injectors, but the fault is there, and the car does not start.Mount the old one, I made a reading with a clip for when to change the ecu, mount the "new" one, save the data, and nothing, it continues with the same failure and without booting.Someone happened something similar to him?
Greetings

[Catalizator]

Error P0601 indicates that an internal module malfunction, namely a memory checksum error, was detected during a self-test of the engine control module (ECM).

[diyre]

Would there be a possibility of the new one, leave it as wine, and cancel the immo?