W447 2015 dash

**clauberty** · 28th May, 2020, 12:58 PM

Hello
read eep from dash on OBD

ori km is 355364

i wold need 165000

Thank you

**Nicolas9** · 28th May, 2020, 03:53 PM

your file is not good..

remove dash. desolder eeprom.
read again, upload here.

**clauberty** · 28th May, 2020, 04:32 PM

this is dash without eep, MCU 70F3525

**Manuelgb** · 28th May, 2020, 04:41 PM

brother dismantle dash and take a 95640, upload file and I modify you

**clauberty** · 28th May, 2020, 04:53 PM

Originally Posted by Manuelgb

brother dismantle dash and take a 95640, upload file and I modify you

this is without eep Dashboards VDO on MCU 70F3525

**jomberykaso** · 28th May, 2020, 05:31 PM

Originally Posted by clauberty

Hello
read eep from dash on OBD

ori km is 355364

i wold need 165000

Thank you

Report...............

**clauberty** · 28th May, 2020, 07:16 PM

attached are ori and after

file

**jomberykaso** · 28th May, 2020, 07:32 PM

Originally Posted by clauberty

attached are ori and after

file

I don't think so. Original mileage is still present in your edited file. You can confirm what i'm talking about if you compare with my edition.

I think mileage is located in line 0C82 (65 3E 1E 02)

65 3E 1E 02 inverted is 02 1E 3E 65, if you convert this code to Decimal is 35536485, then the result is divided by 100, 35536485/100 = 355364,85 (355.364 kms)

**jetronic30** · 28th May, 2020, 09:40 PM

what about can blocker?>

**clauberty** · 28th May, 2020, 11:16 PM

Originally Posted by jetronic30

what about can blocker?>

mounted in the dash

**clauberty** · 28th May, 2020, 11:17 PM

Originally Posted by jomberykaso

I don't think so. Original mileage is still present in your edited file. You can confirm what i'm talking about if you compare with my edition.

I think mileage is located in line 0C82 (65 3E 1E 02)

65 3E 1E 02 inverted is 02 1E 3E 65, if you convert this code to Decimal is 35536485, then the result is divided by 100, 35536485/100 = 355364,85 (355.364 kms)

i will check this tomorrow

**jetronic30** · 30th May, 2020, 09:13 AM

Originally Posted by clauberty

mounted in the dash

can you share can blocker connection ?

**mikkhh** · 30th May, 2020, 11:28 AM

Cluster plug on cluster side has numbered pins.

PIN1 - GND
PIN4 - 12V
PIN12 - CAN L
PIN13 - CAN H

Use multimeter to find suitable points in dash.

**jetronic30** · 30th May, 2020, 02:49 PM

Originally Posted by mikkhh

Cluster plug on cluster side has numbered pins.

PIN1 - GND
PIN4 - 12V
PIN12 - CAN L
PIN13 - CAN H

Use multimeter to find suitable points in dash.

so just like in older Mercedes..

**maucontacto** · 30th September, 2020, 06:09 PM

Originally Posted by jomberykaso

I don't think so. Original mileage is still present in your edited file. You can confirm what i'm talking about if you compare with my edition.

I think mileage is located in line 0C82 (65 3E 1E 02)

65 3E 1E 02 inverted is 02 1E 3E 65, if you convert this code to Decimal is 35536485, then the result is divided by 100, 35536485/100 = 355364,85 (355.364 kms)

After edit and install CAN filter it stays equal... no luck.