ML 163 trouble

[dariobmw]

Good morning , im in trouble with this W163 , done a new key in position 3 and after no start with all key
origina too ,read DAS with fvdi but sadly after the disaster.
the info from the das is key number ------ trasponder programmed = yes
trasponder interloked = no
read ori key with zedbull
pcf7930
10521163f8d5fde10000000000008002

[ASCM]

Good morning , im in trouble with this W163 , done a new key in position 3 and after no start with all key
origina too ,read DAS with fvdi but sadly after the disaster.
the info from the das is key number ------ trasponder programmed = yes
trasponder interloked = no
read ori key with zedbull
pcf7930
10521163f8d5fde10000000000008002

Which tool u used to program key pos-3?

Sent from my SM-J415F using Tapatalk

[dariobmw]

FVDI why ?

[ASCM]

FVDI why ?

Which steps u used to make it?

Sent from my SM-J415F using Tapatalk
Try to disconnect battery after that relearn ori key

[dariobmw]

Hu ok , read immo key occuped , 2-7 , prepared with fvdi tag w163 unprogrammed pcf7935
try first time with the special option creation not work bad pcf programm connecto to obd
and programmed new unprogrammed , key and after programming start error on dash
reprogrammed same key same position , and start error gone but no key more work .

[doctore]

fvdi duet this car in minut, fix tag anthena and make key

[dariobmw]

Thanks for reply , but no more work the ori key too ? why ?
the second pcf done with fvdi tag tool ( prepare is ok ) no work too
the file is ok ?
the key ori what number is ?

[dariobmw]

yes doctore you are right , done in the same way ( if i remember well ) one year ago same car ,
pcf new and blade and lock from scrap , done in 10 min ...... this car is bastard !!!!

[doctore]

reset battery and tr again add original key

[iozo]

or write back original dump to car and see , did original key start car and try to make second key from file whit tango or gambit . i aways use fvdi to read aae eam and make transponder whit tango and car start fine.

[dariobmw]

thanks for your advice you are very kind , and smart , i will try and soon seport , for now i have left it alone ......
(sometimr i think some petrol and a lighter solve alot of problem :-))

[dariobmw]

Ok this morning detached the battery for 1 hour, no start , try to reprogramm the ori key on the position 2 , no start , let the key with the igniton on
for 1/2 hour and car start one time then start error , before all this mess ori key ever work perfect , see on the state , key number ------
trasponde programmed OK trasponder interlocked NO .......
I see around on forum talk about the rolling code

key 10521163F8D5FD53
206BE6D8

[dariobmw]

try to put 521163F8D5 on the 6BE6D8 but no way , i done wrong ?

[ASCM]

try to put 521163F8D5 on the 6BE6D8 but no way , i done wrong ?

Try to make diagnostic with xentry
I you have internal fault maybe the das data corrupted write a good dump in
Das after that relearn key

Sent from my SM-J415F using Tapatalk

[dariobmw]

Thanks for hint , but if i replace the eep content with a good one i lost the motor / das alignement ?
and if yes how to realign ?