it work , tried on meny vw petrol and immo not back , 55 mean ecu and immo are sync . 00 is use if you dont have original immo box.
Hi,
When I make immo off via immibox in diesel cars all ok but on petrol car works and after some time immo back again. I read again hc05 and see that off string 00 ?? ?? goes to 55 ?? ?? are back again,like immo ON.
What couse this on maybe some petrol not all,but 3 cars I have this problem
Tnx
Last edited by ziko; 30th May, 2020 at 05:30 PM.
it work , tried on meny vw petrol and immo not back , 55 mean ecu and immo are sync . 00 is use if you dont have original immo box.
When back to 55 car start 1 seconds, in ecu immo blocked
I also did many but some petrols I have this issue
Not helps also entering pin code and reset immobox,not works ori key programing...
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
Can't program transponder,immo or ecu maybe bad
Bookmarks