just write by avdi and enjoy...............press buttons
Good morning everyone!I made the mistake of using fvdi to read a citroen pin code with jc bsi.
I searched in the forum and i saw that i need to flash the bsi.
Someone can help me?
Citroen C4 Grand Picasso 2009 1.6HDI 109HP Automatic
system: B0
software edition: 07.30
software signature: DC.04
software reference: 9666174180
Last edited by geninho; 1st June, 2020 at 06:32 PM.
just write by avdi and enjoy...............press buttons
need help
now my goal is to buy xp-005
who will help?
Thanks Rafal
can you give me the password?
is ok............... update winrar
i just checked..................also you can wear glasses....... sometimes zero ( 0 ) looks like O but is not
Last edited by rafal; 1st June, 2020 at 07:21 PM.
need help
now my goal is to buy xp-005
who will help?
p1et (1st June, 2020)
ju.jpg
i can't see the password
maybe is better that you send me by MP message
thank you so much
i received the password
thanks
thank you so much
i received the password
sorry for bothering you
thanks
In future, simply connect 2nd car with cables to the car you want to read bsi. Start the engine in 2nd car. Before reading bsi, check what voltage is showing the bsi. It's suppose to be voltage from 2nd car ~ around 14v. Then you are good to go with fvdI
I had 2 JC bsi and all went good. Both all key lost scenario.
As far as I know, if you already bricked bsi, connect 2nd car like I've wrote at the beginning and try to read this bsi again.
Bsi should back to life and you should get your pin code as well.
Here you have some pictures.
https://mhhauto.com/Thread-FVDI-2018...828#pid1567828
Regards
Last edited by Oktawian; 2nd June, 2020 at 04:07 AM.
p1et (2nd June, 2020)
Hello
the flash is not good
can someone give me another?
Last edited by fred77; 3rd June, 2020 at 02:07 AM.
Bookmarks