A4 b8 med17.5 dtc p1570 problem!

[RYPCOL]

Hello everyone


After making an immo off to an audi a4 b8, the car starts, but I have the error is p1570 Engine start blocked by immobilizer with SAFE word in the dash .. I need someone's help to solve this problem


I appreciate who can help me

[rafal]

learn keys to dash...............

[ecuprogramer]

but safe on the dashboard will remain ... when you program the key and the car starts but you still have safe on the dashboard you need to reset the dashboard to make ... and safe will disappear ...

[RYPCOL]

Hi..this is the problem only have a flash file ori....a bad tuning file blocked the ecu and I could only recover it with another dump from another and make immo off and so it turned on ..

I really do not know how to make a new eeprom file with the safety information of the car ... I am not very skilled in vag ecus


I appreciate your help again ... original flash attachment


regards

[ecuprogramer]

I don't know where to start like this .. :-)
If you had more problems, you couldn't learn the key to the car because it wasn't a good eeprom for you, now I've made an eeprom for you so you can learn a new key and safe mode will disappear ok ...

second I made you and a real immo solution Flash immo off and eeprom immo off have a second rar code.
first type the first eeprom in the ecu and learn the key if it doesn't work then it goes immo off and the car lights up ok

FOR HELP REPUTATION AND THNX BUTOON PRESS AFTER RAR PASS

[ECU]
VIN="WAUZZZ8K9AA084240"
IMMO ID=""
CS="05 C7 98 53 B9 ED A6"
MAC="3E 59 94 C0"
Config="DA 8A 7E"
PIN="61328"
Immo Type="IMMO 5"
Immo Status="Learned"

[Gammoudi]

you have to clone the new ecu ; this solution worked for me once and safe dissapeared

[immoneard]

Every time you do Immo off in Flash it will be like that . Immo off only works 100% in eeprom.

[ecuprogramer]

immoneard


Let me explain to you when you work with ori software immo off then it's enough in flash to make or eeprom still works will be ok 1000%. When you work with crack software immo off then it won't work ...


I know how I work and how, I don't need anyone to teach me ... have a nice day everyone ... :-)

[RYPCOL]

Ok .. I understand .... thanks again for all ...


can you send me the first lerned.rar file again, won't let me download it and the password please


thanks ecuprogramer, I will try later and I will tell you the result