Would someone be kind enough to give me pin for this car
VIN: YS3FD46V571120548
Thank you 👍🏻
Would someone be kind enough to give me pin for this car
VIN: YS3FD46V571120548
Thank you 👍🏻
Bit extreme for a spare key
p1et (12th June, 2020)
With known code MVP and other tools can add key if you have a working key
I don't think it matters of you have a working key.
As I said,5 mins to remove cim,read eeprom and make key..
Easy job!
Sent from my MI CC9 Pro Premium Edition using Tapatalk
Why on earth remove CIM for a spare key.
PIN Code is: Z02E
Yes if you don't have time access that's the only way. Some PIN codes are not in database so I must admit that having experience in removing CIM is always a good skill to have, just in case. All keys lost is a little bit tricky to remove CIM I heard? Because you can't turn steering wheel and get clear access to airbag clips / tabs whatever
MVP Pro or Tech2 can program key by OBD if you have PIN.
RG550 (13th June, 2020)
There is no way you’ll remove CIM and read eeprom and build back up in 5 mins
But if that’s the way you do this for spare key that’s fair enough .......
I’m not having a go if that’s the way you do it and it works for you it works
Anything to get job done and get paid 👍🏻
Read with vvdi prog generate with tango then write back with prog. Solder/Desolder is relatively easy with this.
Last edited by WhiteHatLox; 13th June, 2020 at 05:42 AM.
hitag2 can add key to the CIM dump, and remote will works as well.
Queston for @P1et - can mpv programm key by pin with AKL scenario ?
Regards
Bookmarks