EDC16CP34 - EGR OFF - Working solution ?

[alme94]

hi friends, founding some solutions ther ..im interested in egr off for cp34 .. before i doin u1 but its not same 2d design .. i know for 2 and 5 hys but cant find that in cp34 ?

woulde anybody give some advice or tip for that so i finally can turn this s#$t off

thanks mates

cya

[socha1997]

1. 16/255 HiLo
2. Search 8 800
3. You should find 3 hysteresis maps.
4. Change bytes to 0
4. All done
edc16cp34.jpg

[socha1997]

1. 16/255 HiLo
2. Search 8 800
3. You should find 3 hysteresis maps.
4. Change bytes to 0
4. All done

[alme94]

1. 16/255 HiLo
2. Search 8 800
3. You should find 3 hysteresis maps.
4. Change bytes to 0
4. All done

SORRYmate but i must ask ... what you mean search 8 800

[socha1997]

SORRYmate but i must ask ... what you mean search 8 800

Look at picture
You have 3 maps 8x1
You have 00008 00800 01000 01500 01750 02000 02500 03000 03500 and it is axis value
02900 03800 04500 04500 04500 04500 04000 02300 this values you must change to 0 to egr off.
You must change 3 hysteresis maps

[alme94]

Look at picture
You have 3 maps 8x1
You have 00008 00800 01000 01500 01750 02000 02500 03000 03500 and it is axis value
02900 03800 04500 04500 04500 04500 04000 02300 this values you must change to 0 to egr off.
You must change 3 hysteresis maps

i think that im in right place whole time but someone before me doing something with this map .. look

[alme94]

i think that i found right place, please confirm friend, thank you

[socha1997]

i think that i found right place, please confirm friend, thank you

This is your EGR hysteresis maps