UPA-USB Test 5 and 7 failed

[Koom]

Hi, I tried to read an MC68HC05B16 with the adapter 14 but it did not work.

The hardware test gives me failed on 5 and 7, someone with an idea?


BR

UPA-USB Device Programmer v13014
Licensed to: Xinbo Zhang
System: Microsoft Windows 7 Ultimate Edition Service Pack 1 (build7601), 32-bit
Detecting UUSP...Pease wailt!
Device Description: ELRASOFT UPA-USB3.0 Driver (1.2.2.00, 12/20/2012)
USB Driver Name: UPAUSB.sys, HS Mode
5V Tests. Close J1 and press a key to continue
---------------------------------------------------------------------------------------------------------------
Test1: P1=0V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=0,00V, P2=0,00V (L), P3=0,00V (L), P4=0,00V (L),P6=0,00V (L), P7=0,00V (L), P8=0,00V (L), P9=0,00V
Test Passed
---------------------------------------------------------------------------------------------------------------
Test2: P1=8V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=7,91V, P2=0,00V (L), P3=0,00V (L), P4=0,00V (L),P6=0,00V (L), P7=0,00V (L), P8=0,00V (L), P9=0,00V
Test Passed
---------------------------------------------------------------------------------------------------------------
Test3: P1=9V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=8,99V, P2=0,00V (L), P3=0,00V (L), P4=0,00V (L),P6=0,00V (L), P7=0,00V (L), P8=0,00V (L), P9=0,00V
Test Passed
---------------------------------------------------------------------------------------------------------------
Test4: P1=10V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=9,85V, P2=0,00V (L), P3=0,00V (L), P4=0,00V (L),P6=0,00V (L), P7=0,00V (L), P8=0,00V (L), P9=0,00V
Test Passed
---------------------------------------------------------------------------------------------------------------
Test5: P1=11V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=10,65V, P2=0,00V (L), P3=0,00V (L), P4=0,00V (L),P6=0,00V (L), P7=0,00V (L), P8=0,00V (L), P9=0,00V
P1(10,65V ) not in 10,70V - 11,30V
Test Failed
---------------------------------------------------------------------------------------------------------------
Test6: P1=12V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=11,75V, P2=0,00V (L), P3=0,00V (L), P4=0,00V (L),P6=0,00V (L), P7=0,00V (L), P8=0,00V (L), P9=0,00V
Test Passed
---------------------------------------------------------------------------------------------------------------
Test7: P1=13V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=0V
Result: P1=12,65V, P2=0,00V (L), P3=0,00V (L), P4=0,00V (L),P6=0,00V (L), P7=0,00V (L), P8=0,00V (L), P9=0,00V
P1(12,65V ) not in 12,70V - 13,30V
Test Failed
---------------------------------------------------------------------------------------------------------------
Test20: P1=0V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=5V
Result: P1=0,00V, P2=3,98V (L), P3=0,00V (L), P4=0,00V (L),P6=4,00V (L), P7=0,00V (L), P8=0,00V (L), P9=4,85V
Test Passed
---------------------------------------------------------------------------------------------------------------
Test21: P1=0V, P2=L, P3=L, P4=L, P6=L, P7=L, P8=L, P9=5V
Result: P1=0,00V, P2=0,05V (L), P3=0,00V (L), P4=0,00V (L),P6=0,05V (L), P7=0,00V (L), P8=0,00V (L), P9=4,83V
Test Passed
---------------------------------------------------------------------------------------------------------------
Test22: P1=0V, P2=H, P3=H, P4=H, P6=H, P7=H, P8=H, P9=5V
Result: P1=0,00V, P2=4,82V (H), P3=4,82V (H), P4=4,83V (H),P6=4,85V (H), P7=4,83V (H), P8=4,85V (H), P9=4,85V
Test Passed
---------------------------------------------------------------------------------------------------------------
3.3V Tests. Open J1 and press a key to continue
---------------------------------------------------------------------------------------------------------------
Test40: P1=0V, P2=Z, P3=Z, P4=Z, P6=Z, P7=Z, P8=Z, P9=3.3V
Result: P1=0,00V, P2=2,90V (H), P3=0,00V (H), P4=0,00V (H),P6=2,92V (H), P7=0,00V (H), P8=0,00V (H), P9=3,43V
Test Passed
---------------------------------------------------------------------------------------------------------------
Test41: P1=0V, P2=L, P3=L, P4=L, P6=L, P7=L, P8=L, P9=3.3V
Result: P1=0,00V, P2=0,03V (L), P3=0,00V (L), P4=0,00V (L),P6=0,03V (L), P7=0,00V (L), P8=0,00V (L), P9=3,42V
Test Passed
---------------------------------------------------------------------------------------------------------------
Test42: P1=0V, P2=H, P3=H, P4=H, P6=H, P7=H, P8=H, P9=3.3V
Result: P1=0,00V, P2=3,40V (H), P3=3,40V (H), P4=3,42V (H),P6=3,42V (H), P7=3,42V (H), P8=3,42V (H), P9=3,42V
Test Passed
---------------------------------------------------------------------------------------------------------------
Test60
9544961E0447E012
Test Passed
---------------------------------------------------------------------------------------------------------------
2 Tests failed

[Koom]

Hi, reading ok with upa and adapter 14, but I still have test failed for 7 and 5...

[Zmann]

Nothing to worry. You see that on Test5 P1 is just 0.05v too low and the same thing to Test7.
But if you want, try to slightly increase output voltage of an internal regulator, I think that would help.

[PSAcars]

Hello to all. Or use better usb cable. Mine was bugging and a new good cable and now it is ok.

[Koom]

Nothing to worry. You see that on Test5 P1 is just 0.05v too low and the same thing to Test7.
But if you want, try to slightly increase output voltage of an internal regulator, I think that would help.

merci mon ami, si ce n'est grave je laisse comme ça, il fonctionne bien pour l'instant. encore merci!


Envoyé de mon iPhone en utilisant Tapatalk

[Koom]

thank you my friend, if not serious I leave like this, it works well for now. thanks again!


Envoyé de mon iPhone en utilisant Tapatalk

[Nesi Aleksic]

Or use better usb cable. Mine was bugging and a new good cable and now it is ok.