Pin vw passat b6 from confort

**alkazav** · 25th June, 2020, 02:50 PM

Hello, can someone calculate pin and cs for passat b6 from confort module EEPROM 95320. Thanks in advance

**rafal** · 25th June, 2020, 02:56 PM

bad readed.....................

**RG550** · 25th June, 2020, 02:59 PM

Dump is not ok, read it again.

**alkazav** · 25th June, 2020, 02:59 PM

readed with upa as 95320

**rafal** · 25th June, 2020, 03:05 PM

Originally Posted by alkazav

readed with upa as 95320

and ????????????????????????

**alkazav** · 25th June, 2020, 03:10 PM

See now, please

**immoneard** · 25th June, 2020, 03:34 PM

CS: 1448E2342891C4
Pin: 19927

**rafal** · 25th June, 2020, 03:43 PM

now is ok..................

VIN:

WVWZZZ3CZ8P120587

Immo ID:

VWZCZ000000000

CS:

1448E2342891C4

MAC:

13F8656C

PIN:

19927

Power Class:

FE

ELV:

17DC

CCM Status:

6

Key Count:

2

Key1:

D74F2C6D

Key2: A6713AB1

Hardware version:	HLOW4203040800042000P0041627
VAG Part Number:	3C0959433R
Software version:	0472

**alkazav** · 25th June, 2020, 06:08 PM

Thanks both, immoneard and rafal

**alkazav** · 25th June, 2020, 09:02 PM

I need help again with this car. I replace old broken ecu with new used one. i can read both eeporm and mpc with ktag from both ecu. I do immo of in donor ecu and car start but show error on table and error dtc in engine module. How can I solve this? I tryed to add key again but without sucess

**dimon9555** · 25th June, 2020, 09:39 PM

Everything is very simple, you need to adapt the ecu to the car)))

**alkazav** · 25th June, 2020, 09:50 PM

how? tell me if so simple

**ricked** · 26th June, 2020, 09:55 AM

Originally Posted by alkazav

how? tell me if so simple

magic answer will be "online"

**dimon9555** · 26th June, 2020, 03:00 PM

Originally Posted by alkazav

how? tell me if so simple

A normal person if he wants to adapt two blocks, then he loads dumps from two blocks

**immoneard** · 27th June, 2020, 02:53 AM

Originally Posted by alkazav

I need help again with this car. I replace old broken ecu with new used one. i can read both eeporm and mpc with ktag from both ecu. I do immo of in donor ecu and car start but show error on table and error dtc in engine module. How can I solve this? I tryed to add key again but without sucess

Because you doing immo off wrong way. With correct Immo off no error in dash.