FRM fix is for a dead module.
To reset short circuits, you need tool32.
You can't read D flash because it doesn't exist, it is used as the eeprom.
Hello guys,
Frm3, with short fail.
009CBB short
00A8BC (For some reason, it mixing up left with right)
I could not get a D-flash reading with vvdiprog.
And could not define partitions.
So i read d-flash with Upa.
For some reason, i did not work, dtc remained.
Can i simply press erase, D-flash?
FRM3.rar
E89 E9x LED XE
FRM3R PL2
6135 9249084 02
9249091
Last edited by rob h; 1st July, 2020 at 11:00 PM.
FRM fix is for a dead module.
To reset short circuits, you need tool32.
You can't read D flash because it doesn't exist, it is used as the eeprom.
rob h (2nd July, 2020)
Thanks,
Figured it would cure all that whas wrong.
They tried it with tool32, and this time it did not work.
So what option do we have to restore this module?
Or is there a internal faulth in the Hw itself?
Dont have a spare unit to test this data.
Last edited by rob h; 2nd July, 2020 at 05:36 PM.
They probably don’t know how to do it. The only solution is tool32
Professional BMW immo solutions
Macedonia is one and GREEK!!!
rob h (4th July, 2020)
with upa
emulated eep partition dflash , 16, 0 , create
emulated eep erase and program this file
tanks + reputation
This file, eeprom-fix, is the exact same as have posted in my folder.
So thanks for the effort, but it is not helping me.
If anything, then a confirmed health check, of the p-flash.
Or a healty donor p-flash.
Dont know, how this module works, guessing, if there is a tool32 obd option, it is in the p-flash.
However 2 seperate guys tried fixing it with the tool32 allready.
If the ee is fine, this leaves p-flash, or hw internal damage.
Bookmarks